[manjaro-dev] Problem with mhwd-kernel and 3.11
Rob
korrode at gmail.com
Tue Nov 5 20:59:49 CET 2013
Seems crazy, but Carl if you put the contents of your
/usr/bin/grub-mkconfig on pastebin or something i'll check it compared to
mine/others.
On Wed, Nov 6, 2013 at 6:19 AM, Philip Müller <philm at manjaro.org> wrote:
> Hmm, I assume automatic mode. Only the latest thus release fixed some
> thus issues.
> Please report if otherwise. fstab bug should be fixed. I only tested thus
> 0.8.7.907 based on my releases.
>
> On 11/05/2013 08:17 PM, Carl Duff wrote:
>
> Well, only one forum member has reported the issue so far. And the
> ManjaroBox ISO is the one I spun myself, rather than after your updates.
>
> 1. I used the graphical installer
> 2. Provided the graphical installer provided me with the rights, I should
> have them
> 3. Same error running as root.
> 4. It's not my system (Manjaro 0.8.7) it's ManjaroBox RC2 in a VM.
> However, I will download the proper rc2 release and try again.
>
>
> On 5 November 2013 19:07, Philip Müller <philm at manjaro.org> wrote:
>
>> Hmm, I need more information about his issue. How grub got installed.
>> Partitioning layout.
>>
>> - Did you reinstalled grub as written in the Arch-Wiki?
>> - Do you have the proper write rights on each folder?
>> - Did you test it as root directly (sudo mess)?
>> - Can your reproduce the bug be reinstalling your system in VirtualBox
>> using a blank virtual harddrive?
>>
>> I tested every release I did several times and had never this issue. Also
>> I can't repoduce it without
>> the needed information.
>>
>>
>> On 11/05/2013 07:48 PM, Carl Duff wrote:
>>
>> I think my email cut that bit of the message off, thinking it was my
>> signature. It is there, and says:
>>
>> /usr/bin/grub-editenv: error: cannot open `//boot/grub/grubenv.new': No
>> such file or directory.
>> /usr/bin/grub-mkconfig: line 225: /boot/grub/grub.cfg.new: No such file
>> or directory
>>
>>
>> On 5 November 2013 18:44, Philip Müller <philm at manjaro.org> wrote:
>>
>>> What happens with *sudo grub-mkconfig -o boot/grub/grub.cfg*
>>>
>>>
>>> On 11/05/2013 07:39 PM, Carl Duff wrote:
>>>
>>> [carl at manjaro ~]$ sudo grub-mkconfig -o /boot/grub/grub.cfg
>>> [sudo] password for carl:
>>> /usr/bin/grub-editenv: error: cannot open `//boot/grub/grubenv.new': No
>>> such file or directory.
>>> /usr/bin/grub-mkconfig: line 225: /boot/grub/grub.cfg.new: No such file
>>> or directory
>>>
>>>
>>>
>>> On 5 November 2013 18:36, Philip Müller <philm at manjaro.org> wrote:
>>>
>>>> We have to see what causes it. Also we might try to test to call the
>>>> cmd directly:
>>>>
>>>> grub-mkconfig -o /boot/grub/grub.cfg
>>>>
>>>> On 11/05/2013 01:53 PM, Carl Duff wrote:
>>>>
>>>> Well, as per the original email, I (and another user) get this:
>>>>
>>>> [carl at manjaro ~]$ sudo update-grub
>>>> [sudo] password for carl:
>>>> /usr/bin/grub-editenv: error: cannot open `//boot/grub/grubenv.new': No
>>>> such file or directory.
>>>> /usr/bin/grub-mkconfig: line 225: /boot/grub/grub.cfg.new: No such file
>>>> or directory
>>>>
>>>> I notice the first error line has two forward slashes '//' at the
>>>> begining of the dir address, not one. I am wondering if this might be
>>>> related?
>>>>
>>>> I'll verify where everything is when I get home. All I know is that
>>>> after installing 3.11, it is in /boot/grub , but the pre-installed 3.10 is
>>>> not.
>>>>
>>>> I really need to improve my Linux expertise!
>>>>
>>>> On 4 November 2013 23:53, Philip Müller <philm at manjaro.org> wrote:
>>>>
>>>>> Please verify the folder where you have grub installed. update-grub
>>>>> looks for:
>>>>>
>>>>> [phil at manjaro extra]$ cat /usr/bin/update-grub
>>>>> #! /bin/sh
>>>>> grub-mkconfig -o /boot/grub/grub.cfg
>>>>>
>>>>>
>>>>> On 11/05/2013 12:32 AM, Philip Müller wrote:
>>>>>
>>>>> On my installed system it works:
>>>>>
>>>>> [phil at manjaro extra]$ sudo update-grub
>>>>> Generating grub.cfg ...
>>>>> Found background: /usr/share/grub/background.png
>>>>> Found linux image: /boot/vmlinuz-312-x86_64
>>>>> Found initrd image: /boot/initramfs-312-x86_64.img
>>>>> Found linux image: /boot/vmlinuz-311-x86_64
>>>>> Found initrd image: /boot/initramfs-311-x86_64.img
>>>>> Found linux image: /boot/vmlinuz-310-x86_64
>>>>> Found initrd image: /boot/initramfs-310-x86_64.img
>>>>> Found linux image: /boot/vmlinuz-38-x86_64
>>>>> Found initrd image: /boot/initramfs-38-x86_64.img
>>>>> Found linux image: /boot/vmlinuz-34-x86_64
>>>>> Found initrd image: /boot/initramfs-34-x86_64.img
>>>>> /dev/cdrom: open failed: No medium found
>>>>> /dev/sdb: open failed: No medium found
>>>>> /dev/sdc: open failed: No medium found
>>>>> /dev/sdd: open failed: No medium found
>>>>> /dev/sde: open failed: No medium found
>>>>> No volume groups found
>>>>> Found Manjaro Linux (0.8.7) on /dev/sda5
>>>>> Found memtest86+ image: /boot/memtest86+/memtest.bin
>>>>> done
>>>>>
>>>>> Here is the log of a fresh installed Openbox-0.8.8rc2 switched to
>>>>> testing since that is the branch it was built on.
>>>>> I'll move testing to stable now. No errors to find:
>>>>>
>>>>> [michael at computer ~]$ sudo pacman-mirrors -g -b testing
>>>>>
>>>>> Wir gehen davon aus, dass der lokale Systemadministrator Ihnen die
>>>>> Regeln erklärt hat. Normalerweise läuft es auf drei Regeln hinaus:
>>>>>
>>>>> #1) Resprektieren Sie die Privatsphäre anderer.
>>>>> #2) Denken Sie nach bevor Sie tippen.
>>>>> #3) Mit großer Macht kommt große Verantwortung.
>>>>>
>>>>> [sudo] password for michael:
>>>>> :: Querying servers, this may take some time...
>>>>> Africa
>>>>> -> 1.388 http://manjaro.mirror.ac.za/testing/$repo/$arch
>>>>> Bangladesh
>>>>> -> 0.897 http://mirrors.ispros.com.bd/manjaro/testing/$repo/$arch
>>>>> Belgium
>>>>> -> 0.153 http://ftp.belnet.be/manjaro/testing/$repo/$arch
>>>>> -> 0.148 http://manjaro.cu.be/testing/$repo/$arch
>>>>> Brasil
>>>>> -> 2.098 http://manjaro.fis.unb.br/testing/$repo/$arch
>>>>> -> 1.353
>>>>> http://www.las.ic.unicamp.br/pub/manjarolinux/testing/$repo/$arch
>>>>> Chile
>>>>> -> 0.942 http://manjaro.dcc.uchile.cl/testing/$repo/$arch
>>>>> Colombia
>>>>> -> 0.604 http://mirror.edatel.net.co/manjaro/testing/$repo/$arch
>>>>> Denmark
>>>>> -> 0.256 http://mirrors.dotsrc.org/manjaro/testing/$repo/$arch
>>>>> France
>>>>> -> 0.172 http://manjarolinux.polymorf.fr/testing/$repo/$arch
>>>>> Germany
>>>>> -> 0.098 http://ftp.halifax.rwth-aachen.de/manjaro/testing/$repo/$arch
>>>>> -> 0.180
>>>>> http://ftp.tu-chemnitz.de/pub/linux/manjaro/testing/$repo/$arch
>>>>> -> 0.141
>>>>> http://ftp.rz.tu-bs.de/pub/mirror/manjaro.org/repos/testing/$repo/$arch
>>>>> -> 0.096 http://mirror3.layerjet.com/manjaro/testing/$repo/$arch
>>>>> Greece
>>>>> -> 0.772
>>>>> http://ftp.cc.uoc.gr/mirrors/linux/manjaro/testing/$repo/$arch
>>>>> Indonesia
>>>>> -> 1.897 http://kambing.ui.ac.id/manjaro/testing/$repo/$arch
>>>>> Ireland
>>>>> -> 0.175 http://ftp.heanet.ie/mirrors/manjaro/testing/$repo/$arch
>>>>> Italy
>>>>> -> 0.390
>>>>> http://manjaro.mirror.garr.it/mirrors/manjaro/testing/$repo/$arch
>>>>> Japan
>>>>> -> 1.299
>>>>> http://ftp.tsukuba.wide.ad.jp/Linux/manjaro/testing/$repo/$arch
>>>>> -> 0.976
>>>>> http://www.ftp.ne.jp/Linux/packages/manjaro/testing/$repo/$arch
>>>>> -> 0.996
>>>>> http://ftp.kddilabs.jp/Linux/packages/manjaro/testing/$repo/$arch
>>>>> -> 1.438 http://ftp.riken.jp/Linux/manjaro/testing/$repo/$arch
>>>>> Netherlands
>>>>> -> 0.126
>>>>> http://ftp.nluug.nl/pub/os/Linux/distr/manjaro/testing/$repo/$arch
>>>>> Philippines
>>>>> -> Error!http://mirror.pregi.net/pub/Linux/manjaro/testing/$repo/$arch
>>>>> Romania
>>>>> -> 0.178 http://mirrors.xservers.ro/manjaro/testing/$repo/$arch
>>>>> -> 1.457
>>>>> http://mirrors.serverhost.ro/manjaro/packages/testing/$repo/$arch
>>>>> -> 0.148 http://ftp.lug.ro/manjaro/testing/$repo/$arch
>>>>> -> 0.223 http://manjaro.mirrors.linux.ro/repos/testing/$repo/$arch
>>>>> Russia
>>>>> -> 0.196 http://mirror.yandex.ru/mirrors/manjaro/testing/$repo/$arch
>>>>> Sweden
>>>>> -> 0.303 http://ftp.lysator.liu.se/pub/manjaro/testing/$repo/$arch
>>>>> -> 0.211 http://mirror.zetup.net/manjaro/testing/$repo/$arch
>>>>> Taiwan
>>>>> -> Error!http://free.twaren.net/manjaro/testing/$repo/$arch
>>>>> -> 1.556 http://free.nchc.org.tw/manjaro/testing/$repo/$arch
>>>>> United_Kingdom
>>>>> -> 0.242 http://repo.manjaro.org.uk/testing/$repo/$arch
>>>>> -> .....
>>>>> http://www.mirrorservice.org/sites/repo.manjaro.org/repos/testing/$repo->
>>>>> 0.230
>>>>> -> 0.140 http://mirror.catn.com/pub/manjaro/testing/$repo/$arch
>>>>> -> 0.279 http://manjaro.mirrors.uk2.net/testing/$repo/$arch
>>>>> United_States
>>>>> -> 0.555 http://mirror.dacentec.com/manjaro/testing/$repo/$arch
>>>>> -> 0.874 http://www.gtlib.gatech.edu/pub/manjaro/testing/$repo/$arch
>>>>> -> 0.569 http://mirror.jmu.edu/manjaro/testing/$repo/$arch
>>>>> -> 0.467 http://mirror.solarvps.com/manjaro/testing/$repo/$arch
>>>>> -> 0.711 http://mirror.nexcess.net/manjaro/testing/$repo/$arch
>>>>> -> 0.515 http://www.tuxlinuxnews.com/manjaro/testing/$repo/$arch
>>>>> :: Generated and saved '/etc/pacman.d/mirrorlist' mirrorlist.
>>>>> [michael at computer ~]$ sudo pacman -Syy
>>>>> :: Synchronisiere Paketdatenbanken...
>>>>> core 114,7 KiB 314K/s 00:00
>>>>> [######################] 100%
>>>>> extra 1618,6 KiB 327K/s 00:05
>>>>> [######################] 100%
>>>>> community 2022,4 KiB 340K/s 00:06
>>>>> [######################] 100%
>>>>> multilib 108,5 KiB 337K/s 00:00
>>>>> [######################] 100%
>>>>> [michael at computer ~]$ sudo mhwd-kernel linux311
>>>>> Error: No arguments given (use -h for help).
>>>>> [michael at computer ~]$ sudo mhwd-kernel -i linux311
>>>>> :: Synchronisiere Paketdatenbanken...
>>>>> core 114,7 KiB 344K/s 00:00
>>>>> [######################] 100%
>>>>> extra 1618,6 KiB 362K/s 00:04
>>>>> [######################] 100%
>>>>> community 2022,4 KiB 362K/s 00:06
>>>>> [######################] 100%
>>>>> multilib 108,5 KiB 332K/s 00:00
>>>>> [######################] 100%
>>>>> Löse Abhängigkeiten auf...
>>>>> Suche nach Zwischenkonflikten...
>>>>>
>>>>> Pakete (3): linux311-3.11.6-1 linux311-ndiswrapper-1.58-5
>>>>> linux311-virtualbox-guest-modules-4.3.2-1
>>>>>
>>>>> Gesamtgröße des Downloads: 47,07 MiB
>>>>> Gesamtgröße der zu installierenden Pakete: 65,92 MiB
>>>>>
>>>>> :: Installation fortsetzen? [J/n]
>>>>> :: Empfange Pakete...
>>>>> linux311-3.11.6-1-x... 46,8 MiB 222K/s 03:36
>>>>> [######################] 100%
>>>>> linux311-ndiswrappe... 121,9 KiB 341K/s 00:00
>>>>> [######################] 100%
>>>>> linux311-virtualbox... 121,6 KiB 341K/s 00:00
>>>>> [######################] 100%
>>>>> (3/3) Prüfe Schlüssel im Schlüsselring
>>>>> [######################] 100%
>>>>> (3/3) Überprüfe Paket-Integrität
>>>>> [######################] 100%
>>>>> (3/3) Lade Paket-Dateien
>>>>> [######################] 100%
>>>>> (3/3) Prüfe auf Dateikonflikte
>>>>> [######################] 100%
>>>>> (3/3) Überprüfe verfügbaren Festplattenspeicher
>>>>> [######################] 100%
>>>>> (1/3) Installiere linux311
>>>>> [######################] 100%
>>>>> >>> Updating module dependencies. Please wait ...
>>>>> >>> Generating initial ramdisk, using mkinitcpio. Please wait...
>>>>> ==> Building image from preset: /etc/mkinitcpio.d/linux311.preset:
>>>>> 'default'
>>>>> -> -k /boot/vmlinuz-311-x86_64 -c /etc/mkinitcpio.conf -g
>>>>> /boot/initramfs-311-x86_64.img
>>>>> ==> Starting build: 3.11.6-1-MANJARO
>>>>> -> Running build hook: [base]
>>>>> -> Running build hook: [udev]
>>>>> -> Running build hook: [autodetect]
>>>>> -> Running build hook: [modconf]
>>>>> -> Running build hook: [block]
>>>>> -> Running build hook: [filesystems]
>>>>> -> Running build hook: [keyboard]
>>>>> -> Running build hook: [fsck]
>>>>> ==> Generating module dependencies
>>>>> ==> Creating gzip initcpio image: /boot/initramfs-311-x86_64.img
>>>>> ==> Image generation successful
>>>>> ==> Building image from preset: /etc/mkinitcpio.d/linux311.preset:
>>>>> 'fallback'
>>>>> -> -k /boot/vmlinuz-311-x86_64 -c /etc/mkinitcpio.conf -g
>>>>> /boot/initramfs-311-x86_64-fallback.img -S autodetect
>>>>> ==> Starting build: 3.11.6-1-MANJARO
>>>>> -> Running build hook: [base]
>>>>> -> Running build hook: [udev]
>>>>> -> Running build hook: [modconf]
>>>>> -> Running build hook: [block]
>>>>> ==> WARNING: Possibly missing firmware for module: bfa
>>>>> ==> WARNING: Possibly missing firmware for module: aic94xx
>>>>> ==> WARNING: Possibly missing firmware for module: smsmdtv
>>>>> -> Running build hook: [filesystems]
>>>>> -> Running build hook: [keyboard]
>>>>> -> Running build hook: [fsck]
>>>>> ==> Generating module dependencies
>>>>> ==> Creating gzip initcpio image:
>>>>> /boot/initramfs-311-x86_64-fallback.img
>>>>> ==> Image generation successful
>>>>> grub.cfg wird erstellt …
>>>>> Hintergrund gefunden: /usr/share/grub/background.png
>>>>> Linux-Abbild gefunden: /boot/vmlinuz-311-x86_64
>>>>> initrd-Abbild gefunden: /boot/initramfs-311-x86_64.img
>>>>> Linux-Abbild gefunden: /boot/vmlinuz-310-x86_64
>>>>> initrd-Abbild gefunden: /boot/initramfs-310-x86_64.img
>>>>> /dev/cdrom: open failed: Kein Medium gefunden
>>>>> No volume groups found
>>>>> Found memtest86+ image: /boot/memtest86+/memtest.bin
>>>>> erledigt
>>>>> Optionale Abhängigkeiten für linux311
>>>>> crda: to set the correct wireless channels of your country
>>>>> (2/3) Installiere linux311-ndiswrapper
>>>>> [######################] 100%
>>>>> (3/3) Installiere linux311-virtualbox-guest-mo...
>>>>> [######################] 100%
>>>>> ===> You may want to load vboxguest, vboxsf and vboxvideo
>>>>>
>>>>> Also grub.cfg is fine:
>>>>>
>>>>> [michael at computer ~]$ sudo cat /boot/grub/grub.cfg | grep Linux
>>>>> menuentry 'Manjaro Linux (Kernel: 3.11.6-1-MANJARO x64)' --class
>>>>> manjaro --class gnu-linux --class gnu --class os $menuentry_id_option
>>>>> 'gnulinux-3.11.6-1-MANJARO x64-true-76c37a32-0c48-40f3-afc7-e82283970614' {
>>>>> echo 'Linux 3.11.6-1-MANJARO x64 wird geladen …'
>>>>> menuentry 'Manjaro Linux (Kernel: 3.11.6-1-MANJARO x64 - fallback
>>>>> initramfs)' --class manjaro --class gnu-linux --class gnu --class os
>>>>> $menuentry_id_option 'gnulinux-3.11.6-1-MANJARO
>>>>> x64-fallback-76c37a32-0c48-40f3-afc7-e82283970614' {
>>>>> echo 'Linux 3.11.6-1-MANJARO x64 wird geladen …'
>>>>> menuentry 'Manjaro Linux (Kernel: 3.10.17-1-MANJARO x64)' --class
>>>>> manjaro --class gnu-linux --class gnu --class os $menuentry_id_option
>>>>> 'gnulinux-3.10.17-1-MANJARO x64-true-76c37a32-0c48-40f3-afc7-e82283970614' {
>>>>> echo 'Linux 3.10.17-1-MANJARO x64 wird geladen …'
>>>>> menuentry 'Manjaro Linux (Kernel: 3.10.17-1-MANJARO x64 - fallback
>>>>> initramfs)' --class manjaro --class gnu-linux --class gnu --class os
>>>>> $menuentry_id_option 'gnulinux-3.10.17-1-MANJARO
>>>>> x64-fallback-76c37a32-0c48-40f3-afc7-e82283970614' {
>>>>> echo 'Linux 3.10.17-1-MANJARO x64 wird geladen …'
>>>>>
>>>>> It seems only the mixup not using the right branch. Thats why I wanted
>>>>> to wait till today for the announcement.
>>>>> Mixed packages don't work. Please test when mirrors are synced.
>>>>>
>>>>> On 11/04/2013 10:50 PM, J Fernyhough wrote:
>>>>>
>>>>> Ah! That's not good. :D
>>>>>
>>>>> On 4 November 2013 21:32, Carl Duff <cdrw2400 at gmail.com> <cdrw2400 at gmail.com> wrote:
>>>>>
>>>>> Installed 3.11. It's in /boot/grub. Nothing in grub menu when booting. The
>>>>> command update-grub returns an error.
>>>>>
>>>>>
>>>>> On 4 November 2013 21:28, J Fernyhough <j.fernyhough at gmail.com> <j.fernyhough at gmail.com> wrote:
>>>>>
>>>>> Just to clarify, which kernel are you installing and which appears in
>>>>> /boot/grub? You've mentioned 3.11 twice... (i.e. installing 3.11, only
>>>>> 3.11 appears).
>>>>>
>>>>> On 4 November 2013 21:03, Carl Duff <cdrw2400 at gmail.com> <cdrw2400 at gmail.com> wrote:
>>>>>
>>>>> Did you try on the RC2 release? Apologies, should've been clearer.
>>>>>
>>>>>
>>>>> On 4 November 2013 20:36, Rob <korrode at gmail.com> <korrode at gmail.com> wrote:
>>>>>
>>>>> Personally I can't replicate this.
>>>>>
>>>>> I assume you tried re-installing grub?
>>>>>
>>>>>
>>>>> On Tue, Nov 5, 2013 at 7:19 AM, Carl Duff <cdrw2400 at gmail.com> <cdrw2400 at gmail.com> wrote:
>>>>>
>>>>> Seems to install correctly, but doesn't show up in GRUB. Then tried
>>>>> "sudo
>>>>> update-grub" and got this:
>>>>>
>>>>> [carl at manjaro ~]$ sudo update-grub
>>>>> [sudo] password for carl:
>>>>> /usr/bin/grub-editenv: error: cannot open `//boot/grub/grubenv.new':
>>>>> No
>>>>> such file or directory.
>>>>> /usr/bin/grub-mkconfig: line 225: /boot/grub/grub.cfg.new: No such
>>>>> file
>>>>> or directory
>>>>>
>>>>> Checked /boot/grub and only 3.11 is there.
>>>>>
>>>>> Carl
>>>>>
>>>>> _______________________________________________
>>>>> manjaro-dev mailing listmanjaro-dev at manjaro.orghttp://lists.manjaro.org/cgi-bin/mailman/listinfo/manjaro-dev
>>>>>
>>>>> _______________________________________________
>>>>> manjaro-dev mailing listmanjaro-dev at manjaro.orghttp://lists.manjaro.org/cgi-bin/mailman/listinfo/manjaro-dev
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> manjaro-dev mailing listmanjaro-dev at manjaro.orghttp://lists.manjaro.org/cgi-bin/mailman/listinfo/manjaro-dev
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> manjaro-dev mailing list
>>>>> manjaro-dev at manjaro.org
>>>>> http://lists.manjaro.org/cgi-bin/mailman/listinfo/manjaro-dev
>>>>>
>>>>>
>>>>
>>>>
>>>
>>>
>>
>>
>
>
> _______________________________________________
> manjaro-dev mailing list
> manjaro-dev at manjaro.org
> http://lists.manjaro.org/cgi-bin/mailman/listinfo/manjaro-dev
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.manjaro.org/pipermail/manjaro-dev/attachments/20131106/e3d86c4c/attachment-0001.html>
More information about the manjaro-dev
mailing list