[manjaro-dev] Problem with mhwd-kernel and 3.11
Philip Müller
philm at manjaro.org
Tue Nov 5 20:19:02 CET 2013
Hmm, I assume automatic mode. Only the latest thus release fixed some
thus issues.
Please report if otherwise. fstab bug should be fixed. I only tested
thus 0.8.7.907 based on my releases.
On 11/05/2013 08:17 PM, Carl Duff wrote:
> Well, only one forum member has reported the issue so far. And the
> ManjaroBox ISO is the one I spun myself, rather than after your updates.
>
> 1. I used the graphical installer
> 2. Provided the graphical installer provided me with the rights, I
> should have them
> 3. Same error running as root.
> 4. It's not my system (Manjaro 0.8.7) it's ManjaroBox RC2 in a VM.
> However, I will download the proper rc2 release and try again.
>
>
> On 5 November 2013 19:07, Philip Müller <philm at manjaro.org
> <mailto:philm at manjaro.org>> wrote:
>
> Hmm, I need more information about his issue. How grub got
> installed. Partitioning layout.
>
> - Did you reinstalled grub as written in the Arch-Wiki?
> - Do you have the proper write rights on each folder?
> - Did you test it as root directly (sudo mess)?
> - Can your reproduce the bug be reinstalling your system in
> VirtualBox using a blank virtual harddrive?
>
> I tested every release I did several times and had never this
> issue. Also I can't repoduce it without
> the needed information.
>
>
> On 11/05/2013 07:48 PM, Carl Duff wrote:
>> I think my email cut that bit of the message off, thinking it was
>> my signature. It is there, and says:
>>
>> /usr/bin/grub-editenv: error: cannot open
>> `//boot/grub/grubenv.new': No such file or directory.
>> /usr/bin/grub-mkconfig: line 225: /boot/grub/grub.cfg.new: No
>> such file or directory
>>
>>
>> On 5 November 2013 18:44, Philip Müller <philm at manjaro.org
>> <mailto:philm at manjaro.org>> wrote:
>>
>> What happens with *sudo grub-mkconfig -o boot/grub/grub.cfg*
>>
>>
>> On 11/05/2013 07:39 PM, Carl Duff wrote:
>>> [carl at manjaro ~]$ sudo grub-mkconfig -o /boot/grub/grub.cfg
>>> [sudo] password for carl:
>>> /usr/bin/grub-editenv: error: cannot open
>>> `//boot/grub/grubenv.new': No such file or directory.
>>> /usr/bin/grub-mkconfig: line 225: /boot/grub/grub.cfg.new:
>>> No such file or directory
>>>
>>>
>>>
>>> On 5 November 2013 18:36, Philip Müller <philm at manjaro.org
>>> <mailto:philm at manjaro.org>> wrote:
>>>
>>> We have to see what causes it. Also we might try to test
>>> to call the cmd directly:
>>>
>>> grub-mkconfig -o /boot/grub/grub.cfg
>>>
>>> On 11/05/2013 01:53 PM, Carl Duff wrote:
>>>> Well, as per the original email, I (and another user)
>>>> get this:
>>>> [carl at manjaro ~]$ sudo update-grub
>>>> [sudo] password for carl:
>>>> /usr/bin/grub-editenv: error: cannot open
>>>> `//boot/grub/grubenv.new': No such file or directory.
>>>> /usr/bin/grub-mkconfig: line 225:
>>>> /boot/grub/grub.cfg.new: No such file or directory
>>>> I notice the first error line has two forward slashes
>>>> '//' at the begining of the dir address, not one. I am
>>>> wondering if this might be related?
>>>> I'll verify where everything is when I get home. All I
>>>> know is that after installing 3.11, it is in
>>>> /boot/grub , but the pre-installed 3.10 is not.
>>>> I really need to improve my Linux expertise!
>>>>
>>>> On 4 November 2013 23:53, Philip Müller
>>>> <philm at manjaro.org <mailto:philm at manjaro.org>> wrote:
>>>>
>>>> Please verify the folder where you have grub
>>>> installed. update-grub looks for:
>>>>
>>>> [phil at manjaro extra]$ cat /usr/bin/update-grub
>>>> #! /bin/sh
>>>> grub-mkconfig -o /boot/grub/grub.cfg
>>>>
>>>>
>>>> On 11/05/2013 12:32 AM, Philip Müller wrote:
>>>>> On my installed system it works:
>>>>>
>>>>> [phil at manjaro extra]$ sudo update-grub
>>>>> Generating grub.cfg ...
>>>>> Found background: /usr/share/grub/background.png
>>>>> Found linux image: /boot/vmlinuz-312-x86_64
>>>>> Found initrd image: /boot/initramfs-312-x86_64.img
>>>>> Found linux image: /boot/vmlinuz-311-x86_64
>>>>> Found initrd image: /boot/initramfs-311-x86_64.img
>>>>> Found linux image: /boot/vmlinuz-310-x86_64
>>>>> Found initrd image: /boot/initramfs-310-x86_64.img
>>>>> Found linux image: /boot/vmlinuz-38-x86_64
>>>>> Found initrd image: /boot/initramfs-38-x86_64.img
>>>>> Found linux image: /boot/vmlinuz-34-x86_64
>>>>> Found initrd image: /boot/initramfs-34-x86_64.img
>>>>> /dev/cdrom: open failed: No medium found
>>>>> /dev/sdb: open failed: No medium found
>>>>> /dev/sdc: open failed: No medium found
>>>>> /dev/sdd: open failed: No medium found
>>>>> /dev/sde: open failed: No medium found
>>>>> No volume groups found
>>>>> Found Manjaro Linux (0.8.7) on /dev/sda5
>>>>> Found memtest86+ image: /boot/memtest86+/memtest.bin
>>>>> done
>>>>>
>>>>> Here is the log of a fresh installed
>>>>> Openbox-0.8.8rc2 switched to testing since that is
>>>>> the branch it was built on.
>>>>> I'll move testing to stable now. No errors to find:
>>>>>
>>>>> [michael at computer ~]$ sudo pacman-mirrors -g -b
>>>>> testing
>>>>>
>>>>> Wir gehen davon aus, dass der lokale
>>>>> Systemadministrator Ihnen die
>>>>> Regeln erklärt hat. Normalerweise läuft es auf
>>>>> drei Regeln hinaus:
>>>>>
>>>>> #1) Resprektieren Sie die Privatsphäre anderer.
>>>>> #2) Denken Sie nach bevor Sie tippen.
>>>>> #3) Mit großer Macht kommt große Verantwortung.
>>>>>
>>>>> [sudo] password for michael:
>>>>> :: Querying servers, this may take some time...
>>>>> Africa
>>>>> -> 1.388
>>>>> http://manjaro.mirror.ac.za/testing/$repo/$arch
>>>>> Bangladesh
>>>>> -> 0.897
>>>>> http://mirrors.ispros.com.bd/manjaro/testing/$repo/$arch
>>>>> Belgium
>>>>> -> 0.153
>>>>> http://ftp.belnet.be/manjaro/testing/$repo/$arch
>>>>> -> 0.148 http://manjaro.cu.be/testing/$repo/$arch
>>>>> Brasil
>>>>> -> 2.098 http://manjaro.fis.unb.br/testing/$repo/$arch
>>>>> -> 1.353
>>>>> http://www.las.ic.unicamp.br/pub/manjarolinux/testing/$repo/$arch
>>>>> Chile
>>>>> -> 0.942
>>>>> http://manjaro.dcc.uchile.cl/testing/$repo/$arch
>>>>> Colombia
>>>>> -> 0.604
>>>>> http://mirror.edatel.net.co/manjaro/testing/$repo/$arch
>>>>> Denmark
>>>>> -> 0.256
>>>>> http://mirrors.dotsrc.org/manjaro/testing/$repo/$arch
>>>>> France
>>>>> -> 0.172
>>>>> http://manjarolinux.polymorf.fr/testing/$repo/$arch
>>>>> Germany
>>>>> -> 0.098
>>>>> http://ftp.halifax.rwth-aachen.de/manjaro/testing/$repo/$arch
>>>>> -> 0.180
>>>>> http://ftp.tu-chemnitz.de/pub/linux/manjaro/testing/$repo/$arch
>>>>> -> 0.141
>>>>> http://ftp.rz.tu-bs.de/pub/mirror/manjaro.org/repos/testing/$repo/$arch
>>>>> -> 0.096
>>>>> http://mirror3.layerjet.com/manjaro/testing/$repo/$arch
>>>>> Greece
>>>>> -> 0.772
>>>>> http://ftp.cc.uoc.gr/mirrors/linux/manjaro/testing/$repo/$arch
>>>>> Indonesia
>>>>> -> 1.897
>>>>> http://kambing.ui.ac.id/manjaro/testing/$repo/$arch
>>>>> Ireland
>>>>> -> 0.175
>>>>> http://ftp.heanet.ie/mirrors/manjaro/testing/$repo/$arch
>>>>> Italy
>>>>> -> 0.390
>>>>> http://manjaro.mirror.garr.it/mirrors/manjaro/testing/$repo/$arch
>>>>> Japan
>>>>> -> 1.299
>>>>> http://ftp.tsukuba.wide.ad.jp/Linux/manjaro/testing/$repo/$arch
>>>>> -> 0.976
>>>>> http://www.ftp.ne.jp/Linux/packages/manjaro/testing/$repo/$arch
>>>>> -> 0.996
>>>>> http://ftp.kddilabs.jp/Linux/packages/manjaro/testing/$repo/$arch
>>>>> -> 1.438
>>>>> http://ftp.riken.jp/Linux/manjaro/testing/$repo/$arch
>>>>> Netherlands
>>>>> -> 0.126
>>>>> http://ftp.nluug.nl/pub/os/Linux/distr/manjaro/testing/$repo/$arch
>>>>> Philippines
>>>>> ->
>>>>> Error!http://mirror.pregi.net/pub/Linux/manjaro/testing/$repo/$arch
>>>>> Romania
>>>>> -> 0.178
>>>>> http://mirrors.xservers.ro/manjaro/testing/$repo/$arch
>>>>> -> 1.457
>>>>> http://mirrors.serverhost.ro/manjaro/packages/testing/$repo/$arch
>>>>> -> 0.148 http://ftp.lug.ro/manjaro/testing/$repo/$arch
>>>>> -> 0.223
>>>>> http://manjaro.mirrors.linux.ro/repos/testing/$repo/$arch
>>>>> Russia
>>>>> -> 0.196
>>>>> http://mirror.yandex.ru/mirrors/manjaro/testing/$repo/$arch
>>>>> Sweden
>>>>> -> 0.303
>>>>> http://ftp.lysator.liu.se/pub/manjaro/testing/$repo/$arch
>>>>> -> 0.211
>>>>> http://mirror.zetup.net/manjaro/testing/$repo/$arch
>>>>> Taiwan
>>>>> ->
>>>>> Error!http://free.twaren.net/manjaro/testing/$repo/$arch
>>>>> -> 1.556
>>>>> http://free.nchc.org.tw/manjaro/testing/$repo/$arch
>>>>> United_Kingdom
>>>>> -> 0.242
>>>>> http://repo.manjaro.org.uk/testing/$repo/$arch
>>>>> -> .....
>>>>> http://www.mirrorservice.org/sites/repo.manjaro.org/repos/testing/$repo->
>>>>> 0.230
>>>>> -> 0.140
>>>>> http://mirror.catn.com/pub/manjaro/testing/$repo/$arch
>>>>> -> 0.279
>>>>> http://manjaro.mirrors.uk2.net/testing/$repo/$arch
>>>>> United_States
>>>>> -> 0.555
>>>>> http://mirror.dacentec.com/manjaro/testing/$repo/$arch
>>>>> -> 0.874
>>>>> http://www.gtlib.gatech.edu/pub/manjaro/testing/$repo/$arch
>>>>> -> 0.569
>>>>> http://mirror.jmu.edu/manjaro/testing/$repo/$arch
>>>>> -> 0.467
>>>>> http://mirror.solarvps.com/manjaro/testing/$repo/$arch
>>>>> -> 0.711
>>>>> http://mirror.nexcess.net/manjaro/testing/$repo/$arch
>>>>> -> 0.515
>>>>> http://www.tuxlinuxnews.com/manjaro/testing/$repo/$arch
>>>>> :: Generated and saved '/etc/pacman.d/mirrorlist'
>>>>> mirrorlist.
>>>>> [michael at computer ~]$ sudo pacman -Syy
>>>>> :: Synchronisiere Paketdatenbanken...
>>>>> core 114,7 KiB 314K/s 00:00
>>>>> [######################] 100%
>>>>> extra 1618,6 KiB 327K/s 00:05
>>>>> [######################] 100%
>>>>> community 2022,4 KiB 340K/s 00:06
>>>>> [######################] 100%
>>>>> multilib 108,5 KiB 337K/s 00:00
>>>>> [######################] 100%
>>>>> [michael at computer ~]$ sudo mhwd-kernel linux311
>>>>> Error: No arguments given (use -h for help).
>>>>> [michael at computer ~]$ sudo mhwd-kernel -i linux311
>>>>> :: Synchronisiere Paketdatenbanken...
>>>>> core 114,7 KiB 344K/s 00:00
>>>>> [######################] 100%
>>>>> extra 1618,6 KiB 362K/s 00:04
>>>>> [######################] 100%
>>>>> community 2022,4 KiB 362K/s 00:06
>>>>> [######################] 100%
>>>>> multilib 108,5 KiB 332K/s 00:00
>>>>> [######################] 100%
>>>>> Löse Abhängigkeiten auf...
>>>>> Suche nach Zwischenkonflikten...
>>>>>
>>>>> Pakete (3): linux311-3.11.6-1
>>>>> linux311-ndiswrapper-1.58-5
>>>>> linux311-virtualbox-guest-modules-4.3.2-1
>>>>>
>>>>> Gesamtgröße des Downloads: 47,07 MiB
>>>>> Gesamtgröße der zu installierenden Pakete: 65,92 MiB
>>>>>
>>>>> :: Installation fortsetzen? [J/n]
>>>>> :: Empfange Pakete...
>>>>> linux311-3.11.6-1-x... 46,8 MiB 222K/s 03:36
>>>>> [######################] 100%
>>>>> linux311-ndiswrappe... 121,9 KiB 341K/s 00:00
>>>>> [######################] 100%
>>>>> linux311-virtualbox... 121,6 KiB 341K/s 00:00
>>>>> [######################] 100%
>>>>> (3/3) Prüfe Schlüssel im Schlüsselring
>>>>> [######################] 100%
>>>>> (3/3) Überprüfe Paket-Integrität
>>>>> [######################] 100%
>>>>> (3/3) Lade Paket-Dateien [######################] 100%
>>>>> (3/3) Prüfe auf Dateikonflikte
>>>>> [######################] 100%
>>>>> (3/3) Überprüfe verfügbaren Festplattenspeicher
>>>>> [######################] 100%
>>>>> (1/3) Installiere linux311
>>>>> [######################] 100%
>>>>> >>> Updating module dependencies. Please wait ...
>>>>> >>> Generating initial ramdisk, using mkinitcpio.
>>>>> Please wait...
>>>>> ==> Building image from preset:
>>>>> /etc/mkinitcpio.d/linux311.preset: 'default'
>>>>> -> -k /boot/vmlinuz-311-x86_64 -c
>>>>> /etc/mkinitcpio.conf -g /boot/initramfs-311-x86_64.img
>>>>> ==> Starting build: 3.11.6-1-MANJARO
>>>>> -> Running build hook: [base]
>>>>> -> Running build hook: [udev]
>>>>> -> Running build hook: [autodetect]
>>>>> -> Running build hook: [modconf]
>>>>> -> Running build hook: [block]
>>>>> -> Running build hook: [filesystems]
>>>>> -> Running build hook: [keyboard]
>>>>> -> Running build hook: [fsck]
>>>>> ==> Generating module dependencies
>>>>> ==> Creating gzip initcpio image:
>>>>> /boot/initramfs-311-x86_64.img
>>>>> ==> Image generation successful
>>>>> ==> Building image from preset:
>>>>> /etc/mkinitcpio.d/linux311.preset: 'fallback'
>>>>> -> -k /boot/vmlinuz-311-x86_64 -c
>>>>> /etc/mkinitcpio.conf -g
>>>>> /boot/initramfs-311-x86_64-fallback.img -S autodetect
>>>>> ==> Starting build: 3.11.6-1-MANJARO
>>>>> -> Running build hook: [base]
>>>>> -> Running build hook: [udev]
>>>>> -> Running build hook: [modconf]
>>>>> -> Running build hook: [block]
>>>>> ==> WARNING: Possibly missing firmware for module: bfa
>>>>> ==> WARNING: Possibly missing firmware for module:
>>>>> aic94xx
>>>>> ==> WARNING: Possibly missing firmware for module:
>>>>> smsmdtv
>>>>> -> Running build hook: [filesystems]
>>>>> -> Running build hook: [keyboard]
>>>>> -> Running build hook: [fsck]
>>>>> ==> Generating module dependencies
>>>>> ==> Creating gzip initcpio image:
>>>>> /boot/initramfs-311-x86_64-fallback.img
>>>>> ==> Image generation successful
>>>>> grub.cfg wird erstellt …
>>>>> Hintergrund gefunden: /usr/share/grub/background.png
>>>>> Linux-Abbild gefunden: /boot/vmlinuz-311-x86_64
>>>>> initrd-Abbild gefunden: /boot/initramfs-311-x86_64.img
>>>>> Linux-Abbild gefunden: /boot/vmlinuz-310-x86_64
>>>>> initrd-Abbild gefunden: /boot/initramfs-310-x86_64.img
>>>>> /dev/cdrom: open failed: Kein Medium gefunden
>>>>> No volume groups found
>>>>> Found memtest86+ image: /boot/memtest86+/memtest.bin
>>>>> erledigt
>>>>> Optionale Abhängigkeiten für linux311
>>>>> crda: to set the correct wireless channels of
>>>>> your country
>>>>> (2/3) Installiere linux311-ndiswrapper
>>>>> [######################] 100%
>>>>> (3/3) Installiere linux311-virtualbox-guest-mo...
>>>>> [######################] 100%
>>>>> ===> You may want to load vboxguest, vboxsf and
>>>>> vboxvideo
>>>>>
>>>>> Also grub.cfg is fine:
>>>>>
>>>>> [michael at computer ~]$ sudo cat /boot/grub/grub.cfg
>>>>> | grep Linux
>>>>> menuentry 'Manjaro Linux (Kernel: 3.11.6-1-MANJARO
>>>>> x64)' --class manjaro --class gnu-linux --class
>>>>> gnu --class os $menuentry_id_option
>>>>> 'gnulinux-3.11.6-1-MANJARO
>>>>> x64-true-76c37a32-0c48-40f3-afc7-e82283970614' {
>>>>> echo 'Linux 3.11.6-1-MANJARO x64 wird geladen …'
>>>>> menuentry 'Manjaro Linux (Kernel: 3.11.6-1-MANJARO
>>>>> x64 - fallback initramfs)' --class manjaro --class
>>>>> gnu-linux --class gnu --class os
>>>>> $menuentry_id_option 'gnulinux-3.11.6-1-MANJARO
>>>>> x64-fallback-76c37a32-0c48-40f3-afc7-e82283970614' {
>>>>> echo 'Linux 3.11.6-1-MANJARO x64 wird geladen …'
>>>>> menuentry 'Manjaro Linux (Kernel:
>>>>> 3.10.17-1-MANJARO x64)' --class manjaro --class
>>>>> gnu-linux --class gnu --class os
>>>>> $menuentry_id_option 'gnulinux-3.10.17-1-MANJARO
>>>>> x64-true-76c37a32-0c48-40f3-afc7-e82283970614' {
>>>>> echo 'Linux 3.10.17-1-MANJARO x64 wird geladen …'
>>>>> menuentry 'Manjaro Linux (Kernel:
>>>>> 3.10.17-1-MANJARO x64 - fallback initramfs)'
>>>>> --class manjaro --class gnu-linux --class gnu
>>>>> --class os $menuentry_id_option
>>>>> 'gnulinux-3.10.17-1-MANJARO
>>>>> x64-fallback-76c37a32-0c48-40f3-afc7-e82283970614' {
>>>>> echo 'Linux 3.10.17-1-MANJARO x64 wird geladen …'
>>>>>
>>>>> It seems only the mixup not using the right
>>>>> branch. Thats why I wanted to wait till today for
>>>>> the announcement.
>>>>> Mixed packages don't work. Please test when
>>>>> mirrors are synced.
>>>>>
>>>>> On 11/04/2013 10:50 PM, J Fernyhough wrote:
>>>>>> Ah! That's not good. :D
>>>>>>
>>>>>> On 4 November 2013 21:32, Carl Duff<cdrw2400 at gmail.com> <mailto:cdrw2400 at gmail.com> wrote:
>>>>>>> Installed 3.11. It's in /boot/grub. Nothing in grub menu when booting. The
>>>>>>> command update-grub returns an error.
>>>>>>>
>>>>>>>
>>>>>>> On 4 November 2013 21:28, J Fernyhough<j.fernyhough at gmail.com> <mailto:j.fernyhough at gmail.com> wrote:
>>>>>>>> Just to clarify, which kernel are you installing and which appears in
>>>>>>>> /boot/grub? You've mentioned 3.11 twice... (i.e. installing 3.11, only
>>>>>>>> 3.11 appears).
>>>>>>>>
>>>>>>>> On 4 November 2013 21:03, Carl Duff<cdrw2400 at gmail.com> <mailto:cdrw2400 at gmail.com> wrote:
>>>>>>>>> Did you try on the RC2 release? Apologies, should've been clearer.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> On 4 November 2013 20:36, Rob<korrode at gmail.com> <mailto:korrode at gmail.com> wrote:
>>>>>>>>>> Personally I can't replicate this.
>>>>>>>>>>
>>>>>>>>>> I assume you tried re-installing grub?
>>>>>>>>>>
>>>>>>>>>>
>>>>>>>>>> On Tue, Nov 5, 2013 at 7:19 AM, Carl Duff<cdrw2400 at gmail.com> <mailto:cdrw2400 at gmail.com> wrote:
>>>>>>>>>>> Seems to install correctly, but doesn't show up in GRUB. Then tried
>>>>>>>>>>> "sudo
>>>>>>>>>>> update-grub" and got this:
>>>>>>>>>>>
>>>>>>>>>>> [carl at manjaro ~]$ sudo update-grub
>>>>>>>>>>> [sudo] password for carl:
>>>>>>>>>>> /usr/bin/grub-editenv: error: cannot open `//boot/grub/grubenv.new':
>>>>>>>>>>> No
>>>>>>>>>>> such file or directory.
>>>>>>>>>>> /usr/bin/grub-mkconfig: line 225: /boot/grub/grub.cfg.new: No such
>>>>>>>>>>> file
>>>>>>>>>>> or directory
>>>>>>>>>>>
>>>>>>>>>>> Checked /boot/grub and only 3.11 is there.
>>>>>>>>>>>
>>>>>>>>>>> Carl
>>>>>>>> _______________________________________________
>>>>>>>> manjaro-dev mailing list
>>>>>>>> manjaro-dev at manjaro.org <mailto:manjaro-dev at manjaro.org>
>>>>>>>> http://lists.manjaro.org/cgi-bin/mailman/listinfo/manjaro-dev
>>>>>> _______________________________________________
>>>>>> manjaro-dev mailing list
>>>>>> manjaro-dev at manjaro.org <mailto:manjaro-dev at manjaro.org>
>>>>>> http://lists.manjaro.org/cgi-bin/mailman/listinfo/manjaro-dev
>>>>>
>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> manjaro-dev mailing list
>>>>> manjaro-dev at manjaro.org <mailto:manjaro-dev at manjaro.org>
>>>>> http://lists.manjaro.org/cgi-bin/mailman/listinfo/manjaro-dev
>>>>
>>>>
>>>> _______________________________________________
>>>> manjaro-dev mailing list
>>>> manjaro-dev at manjaro.org
>>>> <mailto:manjaro-dev at manjaro.org>
>>>> http://lists.manjaro.org/cgi-bin/mailman/listinfo/manjaro-dev
>>>>
>>>>
>>>
>>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.manjaro.org/pipermail/manjaro-dev/attachments/20131105/58ccfc8d/attachment-0001.html>
More information about the manjaro-dev
mailing list