[manjaro-dev] Fwd: bug report against Xorg
Philip Müller
philm at manjaro.org
Sat Sep 12 08:54:26 CEST 2015
Do we have some information on this one?
-------- Forwarded Message --------
Subject: bug report against Xorg
Date: Fri, 11 Sep 2015 17:31:13 +0200 (CEST)
From: fulvio ciriaco <oivulf at gmail.com>
To: support at manjaro.org
Hello,
I could not find a bug report system for manjaro, so I suppose I should
report here.
I hit a problem while attempting to open a second X session on my computer.
My main X session is usually on vt1, left there from lightdm.
When I login on vt2 and launch a second session through startx, the main
session aborts, lightdm aborts too. The second session works.
If I log on vt1 and try to start another session, X refuses to start.
Also attempting to restart lightdm does not work.
I attach the log of the successfull Xorg.1.log and unsuccessfull Xorg.2.log
and for lightdm x-0.log
My packages are updated to latest 15.09.
Best regards and many thanks for the Manjaro distribution
Fulvio
-------------- next part --------------
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 12)
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, fast devsel, latency 0
Capabilities: <access denied>
Kernel modules: intel_agp
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 12) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 24
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 00003000-00003fff
Memory behind bridge: d2000000-d30fffff
Prefetchable memory behind bridge: 00000000c0000000-00000000d1ffffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, fast devsel, latency 0, IRQ 25
Memory at d7324000 (64-bit, non-prefetchable) [size=16]
Capabilities: <access denied>
Kernel driver in use: mei_me
Kernel modules: mei_me
00:19.0 Ethernet controller: Intel Corporation 82577LM Gigabit Network Connection (rev 06)
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, fast devsel, latency 0, IRQ 26
Memory at d7300000 (32-bit, non-prefetchable) [size=128K]
Memory at d7329000 (32-bit, non-prefetchable) [size=4K]
I/O ports at 4000 [size=32]
Capabilities: <access denied>
Kernel driver in use: e1000e
Kernel modules: e1000e
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, medium devsel, latency 0, IRQ 16
Memory at d7328000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, fast devsel, latency 0, IRQ 27
Memory at d7320000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 16
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
I/O behind bridge: 00005000-00005fff
Memory behind bridge: d7200000-d72fffff
Prefetchable memory behind bridge: 00000000d7500000-00000000d76fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 17
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 00006000-00006fff
Memory behind bridge: d7100000-d71fffff
Prefetchable memory behind bridge: 00000000d7700000-00000000d78fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) (prog-if 00 [Normal decode])
Flags: bus master, fast devsel, latency 0, IRQ 18
Bus: primary=00, secondary=04, subordinate=05, sec-latency=0
I/O behind bridge: 00002000-00002fff
Memory behind bridge: d5100000-d70fffff
Prefetchable memory behind bridge: 00000000d3100000-00000000d50fffff
Capabilities: <access denied>
Kernel driver in use: pcieport
Kernel modules: shpchp
00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) (prog-if 20 [EHCI])
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, medium devsel, latency 0, IRQ 23
Memory at d7327000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
Kernel driver in use: ehci-pci
Kernel modules: ehci_pci
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) (prog-if 01 [Subtractive decode])
Flags: bus master, fast devsel, latency 0
Bus: primary=00, secondary=06, subordinate=06, sec-latency=32
Capabilities: <access denied>
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06)
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, medium devsel, latency 0
Capabilities: <access denied>
Kernel driver in use: lpc_ich
Kernel modules: lpc_ich
00:1f.2 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA IDE Controller (rev 06) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at 4078 [size=8]
I/O ports at 4094 [size=4]
I/O ports at 4070 [size=8]
I/O ports at 4090 [size=4]
I/O ports at 4050 [size=16]
I/O ports at 4040 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, pata_acpi, ata_generic
00:1f.5 IDE interface: Intel Corporation 5 Series/3400 Series Chipset 2 port SATA IDE Controller (rev 06) (prog-if 85 [Master SecO PriO])
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, 66MHz, medium devsel, latency 0, IRQ 19
I/O ports at 4068 [size=8]
I/O ports at 408c [size=4]
I/O ports at 4060 [size=8]
I/O ports at 4088 [size=4]
I/O ports at 4030 [size=16]
I/O ports at 4020 [size=16]
Capabilities: <access denied>
Kernel driver in use: ata_piix
Kernel modules: ata_piix, pata_acpi, ata_generic
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06)
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, fast devsel, latency 0, IRQ 18
Memory at d7326000 (64-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Kernel driver in use: intel ips
Kernel modules: intel_ips
01:00.0 VGA compatible controller: NVIDIA Corporation GT218M [NVS 2100M] (rev a2) (prog-if 00 [VGA controller])
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, fast devsel, latency 0, IRQ 29
Memory at d2000000 (32-bit, non-prefetchable) [size=16M]
Memory at c0000000 (64-bit, prefetchable) [size=256M]
Memory at d0000000 (64-bit, prefetchable) [size=32M]
I/O ports at 3000 [size=128]
Expansion ROM at d3080000 [disabled] [size=512K]
Capabilities: <access denied>
Kernel driver in use: nouveau
Kernel modules: nouveau
01:00.1 Audio device: NVIDIA Corporation High Definition Audio Controller (rev a1)
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d3000000 (32-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: snd_hda_intel
Kernel modules: snd_hda_intel
02:00.0 SD Host controller: Ricoh Co Ltd MMC/SD Host Controller (rev 01)
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, fast devsel, latency 0, IRQ 16
Memory at d7202000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
Kernel driver in use: sdhci-pci
Kernel modules: sdhci_pci
02:00.1 System peripheral: Ricoh Co Ltd R5U2xx (R5U230 / R5U231 / R5U241) [Memory Stick Host Controller] (rev 01)
Subsystem: Toshiba America Info Systems Device 0001
Flags: bus master, fast devsel, latency 0, IRQ 3
Memory at d7201000 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6200 (rev 35)
Subsystem: Intel Corporation Centrino Advanced-N 6200 2x2 AGN
Flags: bus master, fast devsel, latency 0, IRQ 28
Memory at d7100000 (64-bit, non-prefetchable) [size=8K]
Capabilities: <access denied>
Kernel driver in use: iwlwifi
Kernel modules: iwlwifi
ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:02.1 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor QPI Physical 0 (rev 02)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:02.2 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
ff:02.3 Host bridge: Intel Corporation 1st Generation Core i3/5/7 Processor Reserved (rev 02)
Subsystem: Intel Corporation Device 8086
Flags: bus master, fast devsel, latency 0
-------------- next part --------------
[ 0.000000] microcode: CPU0 microcode updated early to revision 0xe, date = 2013-06-26
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.1.6-3-MANJARO (builduser at manjaro) (gcc version 5.2.0 (GCC) ) #1 SMP PREEMPT Sat Sep 5 10:57:06 UTC 2015
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-4.1-x86_64 root=UUID=1057e760-4d08-43b7-a289-5cb3f89c7e10 rw resume=UUID=d22f7ccc-eefd-4711-b773-652c7f7f7175
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009ebff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009ec00-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf0cffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf0d0000-0x00000000bf0d01ff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf0d0200-0x00000000bf0d1fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf0d2000-0x00000000bf1cffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bf1d0000-0x00000000bf1effff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bf1f0000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffe00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: TOSHIBA TECRA S11/Portable PC, BIOS Version 3.40 05/18/2012
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-EFFFF write-through
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0FFE00000 mask FFFE00000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT configuration [0-7]: WB WC UC- UC WB WC UC- UC
[ 0.000000] e820: update [mem 0xc0000000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xbf0d0 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
[ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
[ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[ 0.000000] [mem 0x137e00000-0x137ffffff] page 2M
[ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x120000000-0x137dfffff]
[ 0.000000] [mem 0x120000000-0x137dfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x11fffffff]
[ 0.000000] [mem 0x100000000-0x11fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbf0cffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbeffffff] page 2M
[ 0.000000] [mem 0xbf000000-0xbf0cffff] page 4k
[ 0.000000] RAMDISK: [mem 0x377e4000-0x37be9fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000F0030 000014 (v00 TOSHIB)
[ 0.000000] ACPI: RSDT 0x00000000BF1EF038 000058 (v01 TOSHIB A0076 00000003 01000013)
[ 0.000000] ACPI: FACP 0x00000000BF1EE000 000081 (v02 TOSHIB A0076 00000003 LOHR 0000005F)
[ 0.000000] ACPI: DSDT 0x00000000BF1DC000 009CCC (v02 TOSHIB A0076 20110613 INTL 20061109)
[ 0.000000] ACPI: FACS 0x00000000BF15A000 000040
[ 0.000000] ACPI: HPET 0x00000000BF1ED000 000038 (v01 TOSHIB A0076 00000001 LOHR 0000005F)
[ 0.000000] ACPI: APIC 0x00000000BF1EC000 0000BC (v01 TOSHIB A0076 00000001 LOHR 0000005F)
[ 0.000000] ACPI: MCFG 0x00000000BF1EB000 00003C (v01 TOSHIB A0076 00000001 LOHR 0000005F)
[ 0.000000] ACPI: ASF! 0x00000000BF1EA000 0000A0 (v32 TOSHIB A0076 00000001 LOHR 0000005F)
[ 0.000000] ACPI: TCPA 0x00000000BF1E9000 000032 (v02 TOSHIB A0076 00000000 LOHR 0000005F)
[ 0.000000] ACPI: BOOT 0x00000000BF1E8000 000028 (v01 TOSHIB A0076 00000000 LOHR 0000005F)
[ 0.000000] ACPI: SLIC 0x00000000BF1E7000 000176 (v01 TOSHIB A0076 00000000 LOHR 0000005F)
[ 0.000000] ACPI: SSDT 0x00000000BF1DA000 000688 (v01 TOSHIB SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BF1D9000 000692 (v01 TOSHIB SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x00000000BF1D8000 00072A (v01 TOSHIB PtidDevc 00001000 INTL 20061109)
[ 0.000000] ACPI: DMAR 0x00000000BF1D7000 000080 (v01 INTEL CP_DALE 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000BF1D6000 000A10 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000137ffffff]
[ 0.000000] NODE_DATA(0) allocated [mem 0x137ff9000-0x137ffcfff]
[ 0.000000] [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.000000] Normal [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.000000] node 0: [mem 0x0000000000100000-0x00000000bf0cffff]
[ 0.000000] node 0: [mem 0x0000000100000000-0x0000000137ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000137ffffff]
[ 0.000000] On node 0 totalpages: 1011821
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12164 pages used for memmap
[ 0.000000] DMA32 zone: 778448 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 229376 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf0d0000-0xbf0d0fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf0d1000-0xbf0d1fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf0d2000-0xbf1cffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf1d0000-0xbf1effff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbf1f0000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xdfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe0000000-0xefffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf0000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffe00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] clocksource refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 33 pages/cpu @ffff880137c00000 s95576 r8192 d31400 u262144
[ 0.000000] pcpu-alloc: s95576 r8192 d31400 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995988
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1-x86_64 root=UUID=1057e760-4d08-43b7-a289-5cb3f89c7e10 rw resume=UUID=d22f7ccc-eefd-4711-b773-652c7f7f7175
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3900724K/4047284K available (5736K kernel code, 895K rwdata, 1740K rodata, 1184K init, 1152K bss, 146560K reserved, 0K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] clocksource hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2393.910 MHz processor
[ 0.000032] Calibrating delay loop (skipped), value calculated using timer frequency.. 4789.31 BogoMIPS (lpj=7979700)
[ 0.000035] pid_max: default: 32768 minimum: 301
[ 0.000040] ACPI: Core revision 20150410
[ 0.008355] ACPI: All ACPI Tables successfully acquired
[ 0.008377] Security Framework initialized
[ 0.008385] Yama: becoming mindful.
[ 0.008637] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009545] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.009938] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.009945] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.010161] Initializing cgroup subsys blkio
[ 0.010165] Initializing cgroup subsys memory
[ 0.010173] Initializing cgroup subsys devices
[ 0.010176] Initializing cgroup subsys freezer
[ 0.010178] Initializing cgroup subsys net_cls
[ 0.010180] Initializing cgroup subsys bfqio
[ 0.010201] CPU: Physical Processor ID: 0
[ 0.010202] CPU: Processor Core ID: 0
[ 0.010207] mce: CPU supports 9 MCE banks
[ 0.010215] CPU0: Thermal monitoring handled by SMI
[ 0.010222] process: using mwait in idle threads
[ 0.010226] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
[ 0.010227] Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[ 0.010356] Freeing SMP alternatives memory: 20K (ffffffff81a09000 - ffffffff81a0e000)
[ 0.012141] ftrace: allocating 21674 entries in 85 pages
[ 0.023426] dmar: Host address width 36
[ 0.023430] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.023436] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c9008020e30272 ecap 1000
[ 0.023437] dmar: DRHD base: 0x000000fed92000 flags: 0x1
[ 0.023441] dmar: IOMMU 1: reg_base_addr fed92000 ver 1:0 cap c9008020630272 ecap 1000
[ 0.023442] dmar: RMRR base: 0x000000000e0000 end: 0x000000000e7fff
[ 0.023933] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.160785] smpboot: CPU0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz (fam: 06, model: 25, stepping: 02)
[ 0.160812] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[ 0.160830] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[ 0.160833] ... version: 3
[ 0.160834] ... bit width: 48
[ 0.160835] ... generic registers: 4
[ 0.160836] ... value mask: 0000ffffffffffff
[ 0.160837] ... max period: 000000007fffffff
[ 0.160838] ... fixed-purpose events: 3
[ 0.160838] ... event mask: 000000070000000f
[ 0.184220] x86: Booting SMP configuration:
[ 0.184225] .... node #0, CPUs: #1
[ 0.195300] CPU1: Thermal monitoring handled by SMI
[ 0.197499] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.204230] #2
[ 0.215630] microcode: CPU2 microcode updated early to revision 0xe, date = 2013-06-26
[ 0.215665] CPU2: Thermal monitoring handled by SMI
[ 0.224219] #3
[ 0.235387] CPU3: Thermal monitoring handled by SMI
[ 0.237482] x86: Booted up 1 node, 4 CPUs
[ 0.237486] smpboot: Total of 4 processors activated (19158.25 BogoMIPS)
[ 0.239934] devtmpfs: initialized
[ 0.242402] PM: Registering ACPI NVS region [mem 0xbf0d0000-0xbf0d01ff] (512 bytes)
[ 0.242404] PM: Registering ACPI NVS region [mem 0xbf0d2000-0xbf1cffff] (1040384 bytes)
[ 0.242498] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[ 0.242578] pinctrl core: initialized pinctrl subsystem
[ 0.242624] RTC time: 14:50:54, date: 09/11/15
[ 0.242737] NET: Registered protocol family 16
[ 0.257520] cpuidle: using governor ladder
[ 0.270858] cpuidle: using governor menu
[ 0.270890] ACPI: bus type PCI registered
[ 0.270892] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.270968] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.270971] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.271467] PCI: Using configuration type 1 for base access
[ 0.271628] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.271630] mtrr: probably your BIOS does not setup all CPUs.
[ 0.271630] mtrr: corrected configuration.
[ 0.284564] ACPI: Added _OSI(Module Device)
[ 0.284566] ACPI: Added _OSI(Processor Device)
[ 0.284567] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.284568] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.287023] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.287935] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.289679] ACPI: Dynamic OEM Table Load:
[ 0.289687] ACPI: SSDT 0xFFFF880132A29800 000419 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.290100] ACPI: Dynamic OEM Table Load:
[ 0.290107] ACPI: SSDT 0xFFFF880132AF3000 0008B2 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.291180] ACPI: Dynamic OEM Table Load:
[ 0.291186] ACPI: SSDT 0xFFFF880132B20000 000303 (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.291596] ACPI: Dynamic OEM Table Load:
[ 0.291602] ACPI: SSDT 0xFFFF880132AD2200 000119 (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.292367] ACPI: Interpreter enabled
[ 0.292373] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20150410/hwxface-580)
[ 0.292377] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20150410/hwxface-580)
[ 0.292391] ACPI: (supports S0 S3 S4 S5)
[ 0.292393] ACPI: Using IOAPIC for interrupt routing
[ 0.292415] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.296314] ACPI: Power Resource [PDOC] (off)
[ 0.296383] acpi PNP0A05:00: ACPI dock station (docks/bays count: 1)
[ 0.299548] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[ 0.299554] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.299558] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.299969] PCI host bridge to bus 0000:00
[ 0.299972] pci_bus 0000:00: root bus resource [bus 00-fe]
[ 0.299974] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.299976] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.299977] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.299979] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.299980] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.299982] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff window]
[ 0.299984] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff window]
[ 0.299985] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfeafffff window]
[ 0.299993] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[ 0.300013] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
[ 0.300093] pci 0000:00:01.0: [8086:0045] type 01 class 0x060400
[ 0.300123] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.300227] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[ 0.300253] pci 0000:00:16.0: reg 0x10: [mem 0xd7324000-0xd732400f 64bit]
[ 0.300338] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.300431] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[ 0.300812] pci 0000:00:19.0: reg 0x10: [mem 0xd7300000-0xd731ffff]
[ 0.300824] pci 0000:00:19.0: reg 0x14: [mem 0xd7329000-0xd7329fff]
[ 0.300835] pci 0000:00:19.0: reg 0x18: [io 0x4000-0x401f]
[ 0.300917] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[ 0.300979] pci 0000:00:19.0: System wakeup disabled by ACPI
[ 0.301023] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[ 0.301045] pci 0000:00:1a.0: reg 0x10: [mem 0xd7328000-0xd73283ff]
[ 0.301143] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.301189] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.301232] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[ 0.301256] pci 0000:00:1b.0: reg 0x10: [mem 0xd7320000-0xd7323fff 64bit]
[ 0.301355] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.301403] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.301446] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[ 0.301537] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.301622] pci 0000:00:1c.1: [8086:3b44] type 01 class 0x060400
[ 0.301710] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.301759] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.301799] pci 0000:00:1c.2: [8086:3b46] type 01 class 0x060400
[ 0.301888] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.301938] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.301986] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[ 0.302008] pci 0000:00:1d.0: reg 0x10: [mem 0xd7327000-0xd73273ff]
[ 0.302102] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.302148] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.302186] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.302319] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[ 0.302488] pci 0000:00:1f.2: [8086:3b2e] type 00 class 0x01018f
[ 0.302507] pci 0000:00:1f.2: reg 0x10: [io 0x4078-0x407f]
[ 0.302518] pci 0000:00:1f.2: reg 0x14: [io 0x4094-0x4097]
[ 0.302529] pci 0000:00:1f.2: reg 0x18: [io 0x4070-0x4077]
[ 0.302540] pci 0000:00:1f.2: reg 0x1c: [io 0x4090-0x4093]
[ 0.302550] pci 0000:00:1f.2: reg 0x20: [io 0x4050-0x405f]
[ 0.302561] pci 0000:00:1f.2: reg 0x24: [io 0x4040-0x404f]
[ 0.302678] pci 0000:00:1f.5: [8086:3b2d] type 00 class 0x010185
[ 0.302697] pci 0000:00:1f.5: reg 0x10: [io 0x4068-0x406f]
[ 0.302708] pci 0000:00:1f.5: reg 0x14: [io 0x408c-0x408f]
[ 0.302719] pci 0000:00:1f.5: reg 0x18: [io 0x4060-0x4067]
[ 0.302729] pci 0000:00:1f.5: reg 0x1c: [io 0x4088-0x408b]
[ 0.302740] pci 0000:00:1f.5: reg 0x20: [io 0x4030-0x403f]
[ 0.302751] pci 0000:00:1f.5: reg 0x24: [io 0x4020-0x402f]
[ 0.302865] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[ 0.302890] pci 0000:00:1f.6: reg 0x10: [mem 0xd7326000-0xd7326fff 64bit]
[ 0.303079] pci 0000:01:00.0: [10de:0a6a] type 00 class 0x030000
[ 0.303094] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.303107] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.303120] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.303129] pci 0000:01:00.0: reg 0x24: [io 0x3000-0x307f]
[ 0.303138] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.303236] pci 0000:01:00.1: [10de:0be3] type 00 class 0x040300
[ 0.303250] pci 0000:01:00.1: reg 0x10: [mem 0xd3000000-0xd3003fff]
[ 0.303390] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.303392] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.303395] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.303398] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.303509] pci 0000:02:00.0: [1180:e822] type 00 class 0x080500
[ 0.303530] pci 0000:02:00.0: MMC controller base frequency changed to 50Mhz.
[ 0.303542] pci 0000:02:00.0: proprietary Ricoh MMC controller disabled (via firewire function)
[ 0.303543] pci 0000:02:00.0: MMC cards are now supported by standard SDHCI controller
[ 0.303564] pci 0000:02:00.0: reg 0x10: [mem 0xd7202000-0xd72020ff]
[ 0.303725] pci 0000:02:00.0: supports D1 D2
[ 0.303727] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.303836] pci 0000:02:00.1: [1180:e230] type 00 class 0x088000
[ 0.303863] pci 0000:02:00.1: reg 0x10: [mem 0xd7201000-0xd72010ff]
[ 0.304014] pci 0000:02:00.1: supports D1 D2
[ 0.304016] pci 0000:02:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.307615] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.307623] pci 0000:00:1c.0: bridge window [mem 0xd7200000-0xd72fffff]
[ 0.307752] pci 0000:03:00.0: [8086:422c] type 00 class 0x028000
[ 0.307816] pci 0000:03:00.0: reg 0x10: [mem 0xd7100000-0xd7101fff 64bit]
[ 0.308038] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.308098] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.314288] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.314296] pci 0000:00:1c.1: bridge window [mem 0xd7100000-0xd71fffff]
[ 0.314373] acpiphp: Slot [1] registered
[ 0.314380] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.314384] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.314389] pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd70fffff]
[ 0.314396] pci 0000:00:1c.2: bridge window [mem 0xd3100000-0xd50fffff 64bit pref]
[ 0.314482] pci 0000:00:1e.0: PCI bridge to [bus 06] (subtractive decode)
[ 0.314494] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive decode)
[ 0.314496] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive decode)
[ 0.314498] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
[ 0.314499] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window] (subtractive decode)
[ 0.314501] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window] (subtractive decode)
[ 0.314503] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff window] (subtractive decode)
[ 0.314504] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff window] (subtractive decode)
[ 0.314506] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfeafffff window] (subtractive decode)
[ 0.314768] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.314818] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 *3 4 5 6 7 11 12 14 15)
[ 0.314864] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.314908] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.314953] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 *6 7 10 12 14 15)
[ 0.314997] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.315042] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.315087] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.315269] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff])
[ 0.315272] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.315276] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.315321] PCI host bridge to bus 0000:ff
[ 0.315323] pci_bus 0000:ff: root bus resource [bus ff]
[ 0.315328] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[ 0.315372] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[ 0.315420] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[ 0.315462] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[ 0.315505] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[ 0.315545] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[ 0.315907] ACPI: Enabled 6 GPEs in block 00 to 3F
[ 0.316161] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.316163] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.316165] vgaarb: loaded
[ 0.316167] vgaarb: bridge control possible 0000:01:00.0
[ 0.316238] PCI: Using ACPI for IRQ routing
[ 0.326029] PCI: pci_cache_line_size set to 64 bytes
[ 0.326211] e820: reserve RAM buffer [mem 0x0009ec00-0x0009ffff]
[ 0.326212] e820: reserve RAM buffer [mem 0xbf0d0000-0xbfffffff]
[ 0.326330] NetLabel: Initializing
[ 0.326332] NetLabel: domain hash size = 128
[ 0.326333] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.326349] NetLabel: unlabeled traffic allowed by default
[ 0.326382] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.326387] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.328423] Switched to clocksource hpet
[ 0.334007] pnp: PnP ACPI init
[ 0.334230] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.334232] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.334234] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.334236] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.334238] system 00:00: [mem 0xd7400000-0xd7400fff] has been reserved
[ 0.334240] system 00:00: [mem 0xfeb00000-0xfeb03fff] has been reserved
[ 0.334242] system 00:00: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.334244] system 00:00: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.334246] system 00:00: [mem 0xff000000-0xffffffff] could not be reserved
[ 0.334248] system 00:00: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.334252] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334521] pnp 00:01: Plug and Play ACPI device, IDs IFX0102 PNP0c31 (active)
[ 0.334612] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.334615] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.334659] system 00:03: [io 0x1000-0x100f] has been reserved
[ 0.334661] system 00:03: [io 0x1010-0x1013] has been reserved
[ 0.334663] system 00:03: [io 0xffff] has been reserved
[ 0.334665] system 00:03: [io 0x0400-0x047f] could not be reserved
[ 0.334667] system 00:03: [io 0x0500-0x053f] has been reserved
[ 0.334670] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334709] system 00:04: [io 0x0680-0x06ff] has been reserved
[ 0.334711] system 00:04: [io 0x01e0-0x01e7] has been reserved
[ 0.334714] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.334748] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.334942] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
[ 0.334983] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.335009] pnp 00:08: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.335122] pnp: PnP ACPI: found 9 devices
[ 0.341777] clocksource acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[ 0.341785] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.341804] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.341807] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
[ 0.341817] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.341820] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[ 0.341840] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.341842] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.341844] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.341846] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x002fffff 64bit pref] res_to_dev_res add_size 200000 min_align 100000
[ 0.341848] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.341850] pci 0000:00:1c.0: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.341851] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.341853] pci 0000:00:1c.1: res[13]=[io 0x1000-0x1fff] res_to_dev_res add_size 1000 min_align 1000
[ 0.341862] pci 0000:00:1c.0: BAR 15: assigned [mem 0xd7500000-0xd76fffff 64bit pref]
[ 0.341867] pci 0000:00:1c.1: BAR 15: assigned [mem 0xd7700000-0xd78fffff 64bit pref]
[ 0.341870] pci 0000:00:1c.0: BAR 13: assigned [io 0x5000-0x5fff]
[ 0.341872] pci 0000:00:1c.1: BAR 13: assigned [io 0x6000-0x6fff]
[ 0.341875] pci 0000:01:00.0: BAR 6: assigned [mem 0xd3080000-0xd30fffff pref]
[ 0.341878] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.341880] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.341883] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.341885] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.341889] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.341892] pci 0000:00:1c.0: bridge window [io 0x5000-0x5fff]
[ 0.341897] pci 0000:00:1c.0: bridge window [mem 0xd7200000-0xd72fffff]
[ 0.341902] pci 0000:00:1c.0: bridge window [mem 0xd7500000-0xd76fffff 64bit pref]
[ 0.341909] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.341912] pci 0000:00:1c.1: bridge window [io 0x6000-0x6fff]
[ 0.341918] pci 0000:00:1c.1: bridge window [mem 0xd7100000-0xd71fffff]
[ 0.341922] pci 0000:00:1c.1: bridge window [mem 0xd7700000-0xd78fffff 64bit pref]
[ 0.341930] pci 0000:00:1c.2: PCI bridge to [bus 04-05]
[ 0.341933] pci 0000:00:1c.2: bridge window [io 0x2000-0x2fff]
[ 0.341939] pci 0000:00:1c.2: bridge window [mem 0xd5100000-0xd70fffff]
[ 0.341943] pci 0000:00:1c.2: bridge window [mem 0xd3100000-0xd50fffff 64bit pref]
[ 0.341950] pci 0000:00:1e.0: PCI bridge to [bus 06]
[ 0.341965] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
[ 0.341967] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
[ 0.341969] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.341970] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.341972] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.341973] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.341975] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.341977] pci_bus 0000:00: resource 11 [mem 0xc0000000-0xfeafffff window]
[ 0.341979] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.341980] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.341982] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.341984] pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
[ 0.341985] pci_bus 0000:02: resource 1 [mem 0xd7200000-0xd72fffff]
[ 0.341987] pci_bus 0000:02: resource 2 [mem 0xd7500000-0xd76fffff 64bit pref]
[ 0.341989] pci_bus 0000:03: resource 0 [io 0x6000-0x6fff]
[ 0.341990] pci_bus 0000:03: resource 1 [mem 0xd7100000-0xd71fffff]
[ 0.341992] pci_bus 0000:03: resource 2 [mem 0xd7700000-0xd78fffff 64bit pref]
[ 0.341994] pci_bus 0000:04: resource 0 [io 0x2000-0x2fff]
[ 0.341995] pci_bus 0000:04: resource 1 [mem 0xd5100000-0xd70fffff]
[ 0.341997] pci_bus 0000:04: resource 2 [mem 0xd3100000-0xd50fffff 64bit pref]
[ 0.341999] pci_bus 0000:06: resource 4 [io 0x0000-0x0cf7 window]
[ 0.342000] pci_bus 0000:06: resource 5 [io 0x0d00-0xffff window]
[ 0.342002] pci_bus 0000:06: resource 6 [mem 0x000a0000-0x000bffff window]
[ 0.342004] pci_bus 0000:06: resource 7 [mem 0x000d0000-0x000d3fff window]
[ 0.342005] pci_bus 0000:06: resource 8 [mem 0x000d4000-0x000d7fff window]
[ 0.342007] pci_bus 0000:06: resource 9 [mem 0x000d8000-0x000dbfff window]
[ 0.342009] pci_bus 0000:06: resource 10 [mem 0x000dc000-0x000dffff window]
[ 0.342010] pci_bus 0000:06: resource 11 [mem 0xc0000000-0xfeafffff window]
[ 0.342042] NET: Registered protocol family 2
[ 0.342234] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.342341] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.342484] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.342517] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.342548] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.342617] NET: Registered protocol family 1
[ 0.343192] pci 0000:01:00.0: Video device with shadowed ROM
[ 0.343273] PCI: CLS 64 bytes, default 64
[ 0.343326] Unpacking initramfs...
[ 0.403082] Freeing initrd memory: 4120K (ffff8800377e4000 - ffff880037bea000)
[ 0.403128] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.403131] software IO TLB [mem 0xbb0d0000-0xbf0d0000] (64MB) mapped at [ffff8800bb0d0000-ffff8800bf0cffff]
[ 0.403161] Simple Boot Flag at 0x7c set to 0x1
[ 0.403308] microcode: CPU0 sig=0x20652, pf=0x10, revision=0xe
[ 0.403315] microcode: CPU1 sig=0x20652, pf=0x10, revision=0xe
[ 0.403325] microcode: CPU2 sig=0x20652, pf=0x10, revision=0xe
[ 0.403332] microcode: CPU3 sig=0x20652, pf=0x10, revision=0xe
[ 0.403403] microcode: Microcode Update Driver: v2.00 <tigran at aivazian.fsnet.co.uk>, Peter Oruba
[ 0.403429] Scanning for low memory corruption every 60 seconds
[ 0.403734] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.403768] Initialise system trusted keyring
[ 0.404124] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.405537] zpool: loaded
[ 0.405539] zbud: loaded
[ 0.405707] VFS: Disk quotas dquot_6.6.0
[ 0.405746] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.405914] Key type big_key registered
[ 0.406214] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.406274] io scheduler noop registered
[ 0.406277] io scheduler deadline registered
[ 0.406308] io scheduler cfq registered
[ 0.406334] io scheduler bfq registered (default)
[ 0.406335] BFQ I/O-scheduler: v7r8
[ 0.407106] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.407122] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.407136] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 0.407137] vesafb: scrolling: redraw
[ 0.407139] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.407154] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90000800000, using 1216k, total 1216k
[ 0.440956] Console: switching to colour frame buffer device 80x30
[ 0.474659] fb0: VESA VGA frame buffer device
[ 0.474675] intel_idle: MWAIT substates: 0x1120
[ 0.474676] intel_idle: v0.4 model 0x25
[ 0.474677] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.474865] GHES: HEST is not enabled!
[ 0.474935] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.495757] 00:06: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.496180] Linux agpgart interface v0.103
[ 0.496495] rtc_cmos 00:05: RTC can wake from S4
[ 0.496640] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.496674] rtc_cmos 00:05: alarms up to one year, 242 bytes nvram, hpet irqs
[ 0.496687] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.497082] NET: Registered protocol family 10
[ 0.497312] NET: Registered protocol family 17
[ 0.497656] Loading compiled-in X.509 certificates
[ 0.497669] registered taskstats version 1
[ 0.498190] Magic number: 15:117:839
[ 0.498308] rtc_cmos 00:05: setting system clock to 2015-09-11 14:50:54 UTC (1441983054)
[ 0.498372] PM: Checking hibernation image partition UUID=d22f7ccc-eefd-4711-b773-652c7f7f7175
[ 0.498375] PM: Hibernation image not present or could not be loaded.
[ 0.498789] Freeing unused kernel memory: 1184K (ffffffff818e1000 - ffffffff81a09000)
[ 0.498791] Write protecting the kernel read-only data: 8192k
[ 0.499072] Freeing unused kernel memory: 396K (ffff88000159d000 - ffff880001600000)
[ 0.499192] Freeing unused kernel memory: 308K (ffff8800017b3000 - ffff880001800000)
[ 0.506319] random: systemd-tmpfile urandom read with 2 bits of entropy available
[ 0.543296] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.544736] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.544780] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.548810] ACPI: bus type USB registered
[ 0.548838] usbcore: registered new interface driver usbfs
[ 0.548848] usbcore: registered new interface driver hub
[ 0.549038] usbcore: registered new device driver usb
[ 0.549888] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.550165] ehci-pci: EHCI PCI platform driver
[ 0.550455] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.550466] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.550484] ehci-pci 0000:00:1a.0: debug port 2
[ 0.554416] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.554440] ehci-pci 0000:00:1a.0: irq 16, io mem 0xd7328000
[ 0.554743] SCSI subsystem initialized
[ 0.557570] sdhci: Secure Digital Host Controller Interface driver
[ 0.557575] sdhci: Copyright(c) Pierre Ossman
[ 0.557934] sdhci-pci 0000:02:00.0: SDHCI controller found [1180:e822] (rev 1)
[ 0.558171] sdhci-pci 0000:02:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
[ 0.558183] sdhci-pci 0000:02:00.0: No vmmc regulator found
[ 0.558186] sdhci-pci 0000:02:00.0: No vqmmc regulator found
[ 0.558227] libata version 3.00 loaded.
[ 0.559921] mmc0: SDHCI controller on PCI [0000:02:00.0] using DMA
[ 0.561943] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.562204] hub 1-0:1.0: USB hub found
[ 0.562216] hub 1-0:1.0: 3 ports detected
[ 0.562591] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.562601] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.562625] ehci-pci 0000:00:1d.0: debug port 2
[ 0.566560] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.566580] ehci-pci 0000:00:1d.0: irq 23, io mem 0xd7327000
[ 0.575268] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.575520] hub 2-0:1.0: USB hub found
[ 0.575533] hub 2-0:1.0: 3 ports detected
[ 0.575832] ata_piix 0000:00:1f.2: version 2.13
[ 0.576035] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 0.584663] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.729538] scsi host0: ata_piix
[ 0.729731] scsi host1: ata_piix
[ 0.729788] ata1: SATA max UDMA/133 cmd 0x4078 ctl 0x4094 bmdma 0x4050 irq 19
[ 0.729796] ata2: SATA max UDMA/133 cmd 0x4070 ctl 0x4090 bmdma 0x4058 irq 19
[ 0.729957] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 0.868848] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.882212] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 0.882218] ata_piix 0000:00:1f.5: SCR access via SIDPR is available but doesn't work
[ 0.882570] scsi host2: ata_piix
[ 0.882700] scsi host3: ata_piix
[ 0.882749] ata3: SATA max UDMA/133 cmd 0x4068 ctl 0x408c bmdma 0x4030 irq 19
[ 0.882751] ata4: SATA max UDMA/133 cmd 0x4060 ctl 0x4088 bmdma 0x4038 irq 19
[ 0.993639] hub 1-1:1.0: USB hub found
[ 0.993842] hub 1-1:1.0: 6 ports detected
[ 1.006545] hub 2-1:1.0: USB hub found
[ 1.006654] hub 2-1:1.0: 8 ports detected
[ 1.262423] usb 1-1.2: new full-speed USB device number 3 using ehci-pci
[ 1.272428] usb 2-1.5: new full-speed USB device number 3 using ehci-pci
[ 1.357346] hub 2-1.5:1.0: USB hub found
[ 1.357529] hub 2-1.5:1.0: 4 ports detected
[ 1.405845] tsc: Refined TSC clocksource calibration: 2393.999 MHz
[ 1.405851] clocksource tsc: mask: 0xffffffffffffffff max_cycles: 0x22821267f49, max_idle_ns: 440795240327 ns
[ 1.415850] usb 1-1.4: new high-speed USB device number 4 using ehci-pci
[ 1.622644] usb 2-1.5.2: new full-speed USB device number 4 using ehci-pci
[ 2.069598] ata2.01: failed to resume link (SControl 0)
[ 2.069690] ata1.01: failed to resume link (SControl 0)
[ 2.223107] ata2.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 2.223135] ata2.01: SATA link down (SStatus 4 SControl 0)
[ 2.223152] ata2.01: link offline, clearing class 3 to NONE
[ 2.223315] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 2.223334] ata1.01: SATA link down (SStatus 4 SControl 0)
[ 2.230105] ata2.00: ATAPI: MATSHITADVD-RAM UJ890AS, 1.00, max UDMA/100
[ 2.230465] ata1.00: ATA-8: Hitachi HTS725032A9A360, PC3OC71E, max UDMA/133
[ 2.230470] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 2.243433] ata2.00: configured for UDMA/100
[ 2.243774] ata1.00: configured for UDMA/133
[ 2.244126] scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72503 C71E PQ: 0 ANSI: 5
[ 2.247988] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ890AS 1.00 PQ: 0 ANSI: 5
[ 2.261687] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 2.261828] sd 0:0:0:0: [sda] Write Protect is off
[ 2.261831] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.261864] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.276041] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 2.276047] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 2.276387] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.395214] sda: sda1 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
sda1: <bsd:bad subpartition - ignored
sda12 sda13 >
[ 2.397476] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.406660] Switched to clocksource tsc
[ 3.642285] random: nonblocking pool is initialized
[ 3.717814] EXT4-fs (sda11): mounted filesystem with ordered data mode. Opts: (null)
[ 6.114662] systemd-udevd[399]: starting version 225
[ 7.092992] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20150410/utaddress-254)
[ 7.092999] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.093003] ACPI Warning: SystemIO range 0x0000000000000540-0x000000000000054F conflicts with OpRegion 0x0000000000000500-0x000000000000057B (\GPIO) (20150410/utaddress-254)
[ 7.093007] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.093008] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053F conflicts with OpRegion 0x0000000000000500-0x000000000000057B (\GPIO) (20150410/utaddress-254)
[ 7.093011] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.093012] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052F conflicts with OpRegion 0x0000000000000500-0x000000000000057B (\GPIO) (20150410/utaddress-254)
[ 7.093015] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.093016] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.130085] pps_core: LinuxPPS API ver. 1 registered
[ 7.130091] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti at linux.it>
[ 7.255629] PTP clock support registered
[ 7.275665] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[ 7.275667] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[ 7.275926] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[ 7.280203] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 7.280209] ACPI: Power Button [PWRB]
[ 7.280268] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
[ 7.280294] ACPI: Lid Switch [LID]
[ 7.280347] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.280350] ACPI: Power Button [PWRF]
[ 7.367944] ACPI: AC Adapter [ADP1] (on-line)
[ 7.412993] ACPI: Video Device [VGA] (multi-head: yes rom: yes post: no)
[ 7.415640] acpi device:02: registered as cooling_device4
[ 7.415716] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
[ 7.446077] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 00:23:18:98:d2:85
[ 7.446087] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[ 7.446170] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: FFFFFF-0FF
[ 7.446209] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[ 7.446505] intel ips 0000:00:1f.6: failed to get i915 symbols, graphics turbo disabled until i915 loads
[ 7.446604] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[ 7.447015] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 7.500583] ACPI: Battery Slot [BAT1] (battery present)
[ 7.563852] toshiba_bluetooth: Toshiba ACPI Bluetooth device driver
[ 7.569116] toshiba_bluetooth: Bluetooth status 1
[ 7.573650] tpm_tis 00:01: 1.2 TPM (device-id 0xB, rev-id 16)
[ 7.623036] tpm_tis 00:01: [Hardware Error]: Adjusting reported timeouts: A 750->750000us B 2000->2000000us C 750->750000us D 750->750000us
[ 7.673125] tpm_tis 00:01: Adjusting TPM timeout parameters.
[ 7.692291] toshiba_haps: Toshiba HDD Active Protection Sensor device
[ 7.697524] wmi: Mapper loaded
[ 7.713756] thermal LNXTHERM:00: registered as thermal_zone0
[ 7.713759] ACPI: Thermal Zone [TZ01] (61 C)
[ 7.796713] toshiba_haps: HDD protection level set to: 2
[ 7.844846] snd_hda_intel 0000:01:00.1: Disabling MSI
[ 7.844857] snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
[ 7.858625] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.21
[ 7.860074] toshiba_acpi: KBD function keys not supported
[ 7.862375] input: Toshiba input device as /devices/virtual/input/input6
[ 8.021584] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC268: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 8.021587] snd_hda_codec_realtek hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 8.021589] snd_hda_codec_realtek hdaudioC0D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 8.021591] snd_hda_codec_realtek hdaudioC0D0: mono: mono_out=0x0
[ 8.021592] snd_hda_codec_realtek hdaudioC0D0: inputs:
[ 8.021595] snd_hda_codec_realtek hdaudioC0D0: Internal Mic=0x19
[ 8.021596] snd_hda_codec_realtek hdaudioC0D0: Mic=0x18
[ 8.024070] toshiba_acpi: Illumination device not available
[ 8.026220] toshiba_acpi: Keyboard illumination not available
[ 8.032496] toshiba_acpi: USB Rapid Charge not supported
[ 8.033830] toshiba_acpi: Sleep and Music not supported
[ 8.035442] toshiba_acpi: Panel Power on not supported
[ 8.037282] toshiba_acpi: USB 3 not supported
[ 8.086560] iTCO_vendor_support: vendor-support=0
[ 8.123068] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 8.123119] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x0460)
[ 8.123203] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.169986] usb 1-1.6: new full-speed USB device number 5 using ehci-pci
[ 8.197874] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[ 8.247367] systemd-udevd[489]: Process 'net.sh eth0 start' failed with exit code 1.
[ 8.402988] cfg80211: Calling CRDA to update world regulatory domain
[ 8.459767] Intel(R) Wireless WiFi driver for Linux
[ 8.459771] Copyright(c) 2003- 2015 Intel Corporation
[ 8.459980] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 8.519120] [drm] Initialized drm 1.1.0 20060810
[ 8.523532] tpm_tis 00:01: TPM is disabled/deactivated (0x7)
[ 8.557472] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[ 8.557541] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 8.557601] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
[ 8.557661] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input12
[ 8.617222] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[ 8.617270] iwlwifi 0000:03:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[ 8.847124] iwlwifi 0000:03:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[ 8.977003] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 8.977008] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 8.977009] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 8.977011] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[ 8.977141] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 9.035105] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 9.035336] input: HDA Intel MID Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 9.035399] input: HDA Intel MID Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
[ 9.072130] checking generic (d1000000 130000) vs hw (c0000000 10000000)
[ 9.072133] checking generic (d1000000 130000) vs hw (d0000000 2000000)
[ 9.072135] fb: switching to nouveaufb from VESA VGA
[ 9.072173] Console: switching to colour dummy device 80x25
[ 9.072601] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0a8500a2
[ 9.072604] nouveau [ DEVICE][0000:01:00.0] Chipset: GT218 (NVA8)
[ 9.072606] nouveau [ DEVICE][0000:01:00.0] Family : NV50
[ 9.104281] nouveau [ VBIOS][0000:01:00.0] using image from PRAMIN
[ 9.104391] nouveau [ VBIOS][0000:01:00.0] BIT signature found
[ 9.104394] nouveau [ VBIOS][0000:01:00.0] version 70.18.47.00.07
[ 9.104832] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
[ 9.104871] nouveau [ PFB][0000:01:00.0] RAM type: DDR3
[ 9.104873] nouveau [ PFB][0000:01:00.0] RAM size: 512 MiB
[ 9.104874] nouveau [ PFB][0000:01:00.0] ZCOMP: 960 tags
[ 9.107291] nouveau [ VOLT][0000:01:00.0] GPU voltage: 850000uv
[ 9.111553] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 9.215178] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 9.233230] systemd-udevd[480]: Process 'net.sh wlan0 start' failed with exit code 1.
[ 9.650496] input: AlpsPS/2 ALPS DualPoint Stick as /devices/platform/i8042/serio1/input/input15
[ 9.665917] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input9
[ 9.675452] mousedev: PS/2 mouse device common for all mice
[ 9.975786] media: Linux media interface: v0.10
[ 10.052608] Linux video capture interface: v2.00
[ 10.079135] SSE version of gcm_enc/dec engaged.
[ 10.121668] Bluetooth: Core ver 2.20
[ 10.121688] NET: Registered protocol family 31
[ 10.121690] Bluetooth: HCI device and connection manager initialized
[ 10.121694] Bluetooth: HCI socket layer initialized
[ 10.121697] Bluetooth: L2CAP socket layer initialized
[ 10.121702] Bluetooth: SCO socket layer initialized
[ 10.254669] Adding 8388604k swap on /dev/sda10. Priority:-1 extents:1 across:8388604k FS
[ 10.278255] usbcore: registered new interface driver btusb
[ 10.280412] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b130)
[ 10.303590] input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input16
[ 10.303766] usbcore: registered new interface driver uvcvideo
[ 10.303769] USB Video Class driver (1.1.1)
[ 10.357714] EXT4-fs (sda6): mounted filesystem with ordered data mode. Opts: (null)
[ 10.392230] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 10.397993] kvm: VM_EXIT_LOAD_IA32_PERF_GLOBAL_CTRL does not work properly. Using workaround
[ 10.728918] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
[ 10.728936] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
[ 10.728941] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
[ 10.749032] nouveau [ CLK][0000:01:00.0] 03: core 135 MHz shader 270 MHz memory 135 MHz
[ 10.749036] nouveau [ CLK][0000:01:00.0] 07: core 405 MHz shader 810 MHz memory 405 MHz
[ 10.749039] nouveau [ CLK][0000:01:00.0] 0f: core 535 MHz shader 1230 MHz memory 790 MHz
[ 10.749083] nouveau [ CLK][0000:01:00.0] --: core 405 MHz shader 810 MHz memory 405 MHz
[ 10.749414] [TTM] Zone kernel: Available graphics memory: 1953376 kiB
[ 10.749416] [TTM] Initializing pool allocator
[ 10.749425] [TTM] Initializing DMA pool allocator
[ 10.749439] nouveau [ DRM] VRAM: 512 MiB
[ 10.749440] nouveau [ DRM] GART: 1048576 MiB
[ 10.749444] nouveau [ DRM] TMDS table version 2.0
[ 10.749446] nouveau [ DRM] DCB version 4.0
[ 10.749448] nouveau [ DRM] DCB outp 00: 010003f3 00010035
[ 10.749450] nouveau [ DRM] DCB outp 01: 02811300 00000000
[ 10.749452] nouveau [ DRM] DCB outp 02: 02822362 00020010
[ 10.749453] nouveau [ DRM] DCB outp 03: 01833310 00000000
[ 10.749455] nouveau [ DRM] DCB outp 04: 088443c6 0f220010
[ 10.749456] nouveau [ DRM] DCB outp 05: 08844382 00020010
[ 10.749457] nouveau [ DRM] DCB conn 00: 00000040
[ 10.749459] nouveau [ DRM] DCB conn 01: 00000100
[ 10.749461] nouveau [ DRM] DCB conn 02: 00001231
[ 10.749462] nouveau [ DRM] DCB conn 03: 00000351
[ 10.749463] nouveau [ DRM] DCB conn 04: 00202446
[ 10.749473] nouveau [ DRM] BIOS FP mode: 1600x900 (97790kHz pixel clock)
[ 10.779485] nouveau W[ DRM] unknown connector type 51
[ 10.779587] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 10.779589] [drm] Driver supports precise vblank timestamp query.
[ 10.813124] nouveau [ DRM] MM: using COPY for buffer copies
[ 11.552021] cfg80211: Calling CRDA to update world regulatory domain
[ 11.770240] nouveau [ DRM] allocated 1600x900 fb: 0x70000, bo ffff880037569400
[ 11.770336] fbcon: nouveaufb (fb0) is primary device
[ 12.120728] Console: switching to colour frame buffer device 128x48
[ 12.121138] nouveau 0000:01:00.0: fb0: nouveaufb frame buffer device
[ 12.121139] nouveau 0000:01:00.0: registered panic notifier
[ 12.138471] [drm] Initialized nouveau 1.2.2 20120801 for 0000:01:00.0 on minor 0
[ 14.707362] cfg80211: Calling CRDA to update world regulatory domain
[ 16.102751] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 16.109669] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 16.321246] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 16.328164] iwlwifi 0000:03:00.0: Radio type=0x1-0x3-0x1
[ 17.855979] cfg80211: Calling CRDA to update world regulatory domain
[ 19.787174] wlp3s0: authenticate with 00:18:4d:cd:b6:08
[ 19.818136] wlp3s0: send auth to 00:18:4d:cd:b6:08 (try 1/3)
[ 19.820320] wlp3s0: authenticated
[ 19.820556] iwlwifi 0000:03:00.0 wlp3s0: disabling HT/VHT due to WEP/TKIP use
[ 19.823878] wlp3s0: associate with 00:18:4d:cd:b6:08 (try 1/3)
[ 19.826959] wlp3s0: RX AssocResp from 00:18:4d:cd:b6:08 (capab=0x471 status=0 aid=2)
[ 19.830992] wlp3s0: associated
[ 21.004570] cfg80211: Calling CRDA to update world regulatory domain
[ 24.153168] cfg80211: Calling CRDA to update world regulatory domain
[ 27.301927] cfg80211: Calling CRDA to update world regulatory domain
[ 30.450630] cfg80211: Calling CRDA to update world regulatory domain
[ 33.599278] cfg80211: Calling CRDA to update world regulatory domain
[ 36.747911] cfg80211: Calling CRDA to update world regulatory domain
[ 39.896540] cfg80211: Calling CRDA to update world regulatory domain
[ 41.545608] fuse init (API version 7.23)
[ 43.045227] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
-------------- next part --------------
[ 976.996]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 976.996] X Protocol Version 11, Revision 0
[ 976.997] Build Operating System: Linux 4.0.4-2-ARCH x86_64
[ 976.997] Current Operating System: Linux fulvio 4.1.6-3-MANJARO #1 SMP PREEMPT Sat Sep 5 10:57:06 UTC 2015 x86_64
[ 976.997] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1-x86_64 root=UUID=1057e760-4d08-43b7-a289-5cb3f89c7e10 rw resume=UUID=d22f7ccc-eefd-4711-b773-652c7f7f7175
[ 976.999] Build Date: 17 July 2015 05:38:19PM
[ 976.999]
[ 977.000] Current version of pixman: 0.32.6
[ 977.001] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 977.001] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 977.003] (==) Log file: "/home/fc/.local/share/xorg/Xorg.2.log", Time: Fri Sep 11 17:07:11 2015
[ 977.003] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 977.004] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 977.004] (==) No Layout section. Using the first Screen section.
[ 977.004] (==) No screen section available. Using defaults.
[ 977.004] (**) |-->Screen "Default Screen Section" (0)
[ 977.004] (**) | |-->Monitor "<default monitor>"
[ 977.004] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 977.004] (**) | |-->Device "Device0"
[ 977.004] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 977.004] (==) Automatically adding devices
[ 977.004] (==) Automatically enabling devices
[ 977.004] (==) Automatically adding GPU devices
[ 977.004] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 977.004] Entry deleted from font path.
[ 977.004] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 977.004] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 977.004] Entry deleted from font path.
[ 977.004] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 977.004] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 977.004] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 977.004] (**) Extension "Composite" is enabled
[ 977.004] (**) Extension "RENDER" is enabled
[ 977.004] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 977.004] (II) Loader magic: 0x817d60
[ 977.004] (II) Module ABI versions:
[ 977.004] X.Org ANSI C Emulation: 0.4
[ 977.004] X.Org Video Driver: 19.0
[ 977.004] X.Org XInput driver : 21.1
[ 977.004] X.Org Server Extension : 9.0
[ 977.011] (EE) systemd-logind: failed to get session: Launch helper exited with unknown return code 1
[ 977.012] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 977.012] (EE) /dev/dri/card0: failed to set DRM interface version 1.4: Permission denied
[ 977.013] (--) PCI:*(0:1:0:0) 10de:0a6a:1179:0001 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 977.013] (II) Open ACPI successful (/var/run/acpid.socket)
[ 977.013] (II) LoadModule: "glx"
[ 977.014] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 977.015] (II) Module glx: vendor="X.Org Foundation"
[ 977.015] compiled for 1.17.2, module version = 1.0.0
[ 977.016] ABI class: X.Org Server Extension, version 9.0
[ 977.016] (==) AIGLX enabled
[ 977.016] (II) LoadModule: "nouveau"
[ 977.016] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 977.016] (II) Module nouveau: vendor="X.Org Foundation"
[ 977.016] compiled for 1.17.0, module version = 1.0.11
[ 977.016] Module class: X.Org Video Driver
[ 977.016] ABI class: X.Org Video Driver, version 19.0
[ 977.016] (II) NOUVEAU driver
[ 977.016] (II) NOUVEAU driver for NVIDIA chipset families :
[ 977.016] RIVA TNT (NV04)
[ 977.016] RIVA TNT2 (NV05)
[ 977.016] GeForce 256 (NV10)
[ 977.016] GeForce 2 (NV11, NV15)
[ 977.016] GeForce 4MX (NV17, NV18)
[ 977.016] GeForce 3 (NV20)
[ 977.016] GeForce 4Ti (NV25, NV28)
[ 977.016] GeForce FX (NV3x)
[ 977.016] GeForce 6 (NV4x)
[ 977.016] GeForce 7 (G7x)
[ 977.016] GeForce 8 (G8x)
[ 977.016] GeForce GTX 200 (NVA0)
[ 977.016] GeForce GTX 400 (NVC0)
[ 977.016] (++) using VT number 1
[ 977.016] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 977.017] (EE) [drm] Failed to open DRM device for pci:0000:01:00.0: -13
[ 977.017] (EE) No devices detected.
[ 977.017] (EE)
Fatal server error:
[ 977.017] (EE) no screens found(EE)
[ 977.017] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 977.017] (EE) Please also check the log file at "/home/fc/.local/share/xorg/Xorg.2.log" for additional information.
[ 977.017] (EE)
-------------- next part --------------
[ 903.176]
X.Org X Server 1.17.2
Release Date: 2015-06-16
[ 903.176] X Protocol Version 11, Revision 0
[ 903.176] Build Operating System: Linux 4.0.4-2-ARCH x86_64
[ 903.176] Current Operating System: Linux fulvio 4.1.6-3-MANJARO #1 SMP PREEMPT Sat Sep 5 10:57:06 UTC 2015 x86_64
[ 903.176] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1-x86_64 root=UUID=1057e760-4d08-43b7-a289-5cb3f89c7e10 rw resume=UUID=d22f7ccc-eefd-4711-b773-652c7f7f7175
[ 903.176] Build Date: 17 July 2015 05:38:19PM
[ 903.176]
[ 903.176] Current version of pixman: 0.32.6
[ 903.176] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 903.176] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 903.176] (==) Log file: "/home/fc/.local/share/xorg/Xorg.1.log", Time: Fri Sep 11 17:05:57 2015
[ 903.177] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 903.177] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 903.177] (==) No Layout section. Using the first Screen section.
[ 903.177] (==) No screen section available. Using defaults.
[ 903.177] (**) |-->Screen "Default Screen Section" (0)
[ 903.177] (**) | |-->Monitor "<default monitor>"
[ 903.177] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 903.177] (**) | |-->Device "Device0"
[ 903.177] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 903.177] (==) Automatically adding devices
[ 903.177] (==) Automatically enabling devices
[ 903.177] (==) Automatically adding GPU devices
[ 903.177] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 903.177] Entry deleted from font path.
[ 903.177] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 903.177] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 903.177] Entry deleted from font path.
[ 903.177] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 903.177] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 903.177] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 903.177] (**) Extension "Composite" is enabled
[ 903.177] (**) Extension "RENDER" is enabled
[ 903.178] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 903.178] (II) Loader magic: 0x817d60
[ 903.178] (II) Module ABI versions:
[ 903.178] X.Org ANSI C Emulation: 0.4
[ 903.178] X.Org Video Driver: 19.0
[ 903.178] X.Org XInput driver : 21.1
[ 903.178] X.Org Server Extension : 9.0
[ 903.185] (EE) systemd-logind: failed to get session: Launch helper exited with unknown return code 1
[ 903.186] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 903.188] (--) PCI:*(0:1:0:0) 10de:0a6a:1179:0001 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 903.188] (II) Open ACPI successful (/var/run/acpid.socket)
[ 903.188] (II) LoadModule: "glx"
[ 903.189] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 903.190] (II) Module glx: vendor="X.Org Foundation"
[ 903.191] compiled for 1.17.2, module version = 1.0.0
[ 903.191] ABI class: X.Org Server Extension, version 9.0
[ 903.191] (==) AIGLX enabled
[ 903.191] (II) LoadModule: "nouveau"
[ 903.191] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
[ 903.191] (II) Module nouveau: vendor="X.Org Foundation"
[ 903.191] compiled for 1.17.0, module version = 1.0.11
[ 903.191] Module class: X.Org Video Driver
[ 903.191] ABI class: X.Org Video Driver, version 19.0
[ 903.191] (II) NOUVEAU driver
[ 903.191] (II) NOUVEAU driver for NVIDIA chipset families :
[ 903.191] RIVA TNT (NV04)
[ 903.191] RIVA TNT2 (NV05)
[ 903.191] GeForce 256 (NV10)
[ 903.191] GeForce 2 (NV11, NV15)
[ 903.191] GeForce 4MX (NV17, NV18)
[ 903.191] GeForce 3 (NV20)
[ 903.191] GeForce 4Ti (NV25, NV28)
[ 903.191] GeForce FX (NV3x)
[ 903.191] GeForce 6 (NV4x)
[ 903.191] GeForce 7 (G7x)
[ 903.191] GeForce 8 (G8x)
[ 903.191] GeForce GTX 200 (NVA0)
[ 903.191] GeForce GTX 400 (NVC0)
[ 903.191] (++) using VT number 2
[ 903.191] (--) controlling tty is VT number 2, auto-enabling KeepTty
[ 903.192] (II) [drm] nouveau interface version: 1.2.2
[ 903.192] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 903.192] (II) Loading sub module "dri2"
[ 903.192] (II) LoadModule: "dri2"
[ 903.192] (II) Module "dri2" already built-in
[ 903.192] (--) NOUVEAU(0): Chipset: "NVIDIA NVA8"
[ 903.192] (II) NOUVEAU(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 903.192] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
[ 903.192] (==) NOUVEAU(0): RGB weight 888
[ 903.192] (==) NOUVEAU(0): Default visual is TrueColor
[ 903.192] (==) NOUVEAU(0): Using HW cursor
[ 903.192] (==) NOUVEAU(0): GLX sync to VBlank enabled.
[ 903.192] (==) NOUVEAU(0): Page flipping enabled
[ 903.192] (==) NOUVEAU(0): Swap limit set to 1 [Max allowed 2]
[ 903.192] (==) NOUVEAU(0): Page flipping synced to vblank by kernel.
[ 903.192] (II) NOUVEAU(0): Initializing outputs ...
[ 903.192] (II) NOUVEAU(0): Output LVDS-1 has no monitor section
[ 903.203] (II) NOUVEAU(0): Output VGA-1 has no monitor section
[ 903.204] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
[ 903.236] (II) NOUVEAU(0): Output VGA-2 using monitor section VGA-2
[ 903.236] (**) NOUVEAU(0): Option "Ignore" "1"
[ 903.289] (II) NOUVEAU(0): Output DP-1 has no monitor section
[ 903.289] (II) NOUVEAU(0): 4 crtcs needed for screen.
[ 903.319] (II) NOUVEAU(0): Allocated crtc nr. 0 to this screen.
[ 903.319] (II) NOUVEAU(0): Allocated crtc nr. 1 to this screen.
[ 903.319] (II) NOUVEAU(0): EDID for output LVDS-1
[ 903.319] (II) NOUVEAU(0): Printing probed modes for output LVDS-1
[ 903.319] (II) NOUVEAU(0): Modeline "1600x900"x60.0 97.79 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.6 kHz eP)
[ 903.319] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz)
[ 903.319] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 903.319] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 903.319] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 903.319] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 903.319] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 903.319] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 903.329] (II) NOUVEAU(0): EDID for output VGA-1
[ 903.331] (II) NOUVEAU(0): EDID for output DVI-D-1
[ 903.383] (II) NOUVEAU(0): EDID for output DP-1
[ 903.383] (II) NOUVEAU(0): Output LVDS-1 connected
[ 903.383] (II) NOUVEAU(0): Output VGA-1 disconnected
[ 903.383] (II) NOUVEAU(0): Output DVI-D-1 disconnected
[ 903.383] (II) NOUVEAU(0): Output DP-1 disconnected
[ 903.383] (II) NOUVEAU(0): Using exact sizes for initial modes
[ 903.383] (II) NOUVEAU(0): Output LVDS-1 using initial mode 1600x900
[ 903.383] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 903.383] (--) NOUVEAU(0): Virtual size is 1600x900 (pitch 0)
[ 903.383] (**) NOUVEAU(0): Driver mode "1600x900": 97.8 MHz (scaled from 0.0 MHz), 55.6 kHz, 60.0 Hz
[ 903.383] (II) NOUVEAU(0): Modeline "1600x900"x60.0 97.79 1600 1648 1680 1760 900 903 908 926 -hsync -vsync (55.6 kHz eP)
[ 903.383] (**) NOUVEAU(0): Mode "1152x864": 81.8 MHz (scaled from 0.0 MHz), 53.8 kHz, 60.0 Hz
[ 903.383] (II) NOUVEAU(0): Modeline "1152x864"x60.0 81.75 1152 1216 1336 1520 864 867 871 897 -hsync +vsync (53.8 kHz)
[ 903.383] (**) NOUVEAU(0): Mode "1024x768": 63.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 59.9 Hz
[ 903.383] (II) NOUVEAU(0): Modeline "1024x768"x59.9 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync (47.8 kHz)
[ 903.383] (**) NOUVEAU(0): Mode "800x600": 38.2 MHz (scaled from 0.0 MHz), 37.4 kHz, 59.9 Hz
[ 903.383] (II) NOUVEAU(0): Modeline "800x600"x59.9 38.25 800 832 912 1024 600 603 607 624 -hsync +vsync (37.4 kHz)
[ 903.383] (**) NOUVEAU(0): Mode "640x480": 23.8 MHz (scaled from 0.0 MHz), 29.7 kHz, 59.4 Hz
[ 903.383] (II) NOUVEAU(0): Modeline "640x480"x59.4 23.75 640 664 720 800 480 483 487 500 -hsync +vsync (29.7 kHz)
[ 903.383] (**) NOUVEAU(0): Mode "720x400": 22.2 MHz (scaled from 0.0 MHz), 24.8 kHz, 59.6 Hz
[ 903.383] (II) NOUVEAU(0): Modeline "720x400"x59.6 22.25 720 744 808 896 400 403 413 417 -hsync +vsync (24.8 kHz)
[ 903.383] (**) NOUVEAU(0): Mode "640x400": 20.0 MHz (scaled from 0.0 MHz), 25.0 kHz, 60.0 Hz
[ 903.383] (II) NOUVEAU(0): Modeline "640x400"x60.0 20.00 640 664 720 800 400 403 409 417 -hsync +vsync (25.0 kHz)
[ 903.383] (**) NOUVEAU(0): Mode "640x350": 17.5 MHz (scaled from 0.0 MHz), 21.9 kHz, 59.8 Hz
[ 903.383] (II) NOUVEAU(0): Modeline "640x350"x59.8 17.50 640 664 720 800 350 353 363 366 -hsync +vsync (21.9 kHz)
[ 903.383] (==) NOUVEAU(0): DPI set to (96, 96)
[ 903.383] (II) Loading sub module "fb"
[ 903.383] (II) LoadModule: "fb"
[ 903.383] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 903.383] (II) Module fb: vendor="X.Org Foundation"
[ 903.383] compiled for 1.17.2, module version = 1.0.0
[ 903.383] ABI class: X.Org ANSI C Emulation, version 0.4
[ 903.383] (II) Loading sub module "shadowfb"
[ 903.383] (II) LoadModule: "shadowfb"
[ 903.383] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
[ 903.383] (II) Module shadowfb: vendor="X.Org Foundation"
[ 903.383] compiled for 1.17.2, module version = 1.0.0
[ 903.383] ABI class: X.Org ANSI C Emulation, version 0.4
[ 903.383] (--) Depth 24 pixmap format is 32 bpp
[ 903.395] (II) NOUVEAU(0): Channel setup complete.
[ 903.397] (II) NOUVEAU(0): [COPY] async initialised.
[ 903.397] (II) NOUVEAU(0): [DRI2] Setup complete
[ 903.397] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
[ 903.397] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
[ 903.399] (II) Loading sub module "exa"
[ 903.399] (II) LoadModule: "exa"
[ 903.399] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 903.399] (II) Module exa: vendor="X.Org Foundation"
[ 903.399] compiled for 1.17.2, module version = 2.6.0
[ 903.399] ABI class: X.Org Video Driver, version 19.0
[ 903.399] (II) EXA(0): Driver allocated offscreen pixmaps
[ 903.399] (II) EXA(0): Driver registered support for the following operations:
[ 903.399] (II) Solid
[ 903.399] (II) Copy
[ 903.399] (II) Composite (RENDER acceleration)
[ 903.399] (II) UploadToScreen
[ 903.399] (II) DownloadFromScreen
[ 903.399] (==) NOUVEAU(0): Backing store enabled
[ 903.399] (==) NOUVEAU(0): Silken mouse enabled
[ 903.399] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
[ 903.399] (II) NOUVEAU(0): [XvMC] Extension initialized.
[ 903.399] (==) NOUVEAU(0): DPMS enabled
[ 903.399] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 903.400] (WW) NOUVEAU(0): Option "DRI" is not used
[ 903.400] (--) RandR disabled
[ 903.435] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 903.435] (II) AIGLX: enabled GLX_ARB_create_context
[ 903.435] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 903.435] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 903.435] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 903.435] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 903.435] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 903.435] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 903.435] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 903.436] (II) AIGLX: Loaded and initialized nouveau
[ 903.436] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 903.439] (II) NOUVEAU(0): NVEnterVT is called.
[ 903.439] Unable to get master: Permission denied
[ 903.469] (II) NOUVEAU(0): Setting screen physical size to 423 x 238
[ 903.469] resize called 1600 900
[ 903.518] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 903.519] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 903.519] (**) Power Button: Applying InputClass "system-keyboard"
[ 903.519] (**) Power Button: Applying InputClass "system-keyboard"
[ 903.519] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 903.519] (II) LoadModule: "evdev"
[ 903.519] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 903.519] (II) Module evdev: vendor="X.Org Foundation"
[ 903.519] compiled for 1.17.1, module version = 2.9.2
[ 903.519] Module class: X.Org XInput Driver
[ 903.519] ABI class: X.Org XInput driver, version 21.0
[ 903.519] (II) Using input driver 'evdev' for 'Power Button'
[ 903.519] (**) Power Button: always reports core events
[ 903.519] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 903.519] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 903.519] (--) evdev: Power Button: Found keys
[ 903.519] (II) evdev: Power Button: Configuring as keyboard
[ 903.519] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 903.519] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 903.519] (**) Option "xkb_rules" "evdev"
[ 903.519] (**) Option "xkb_model" "pc105"
[ 903.519] (**) Option "xkb_layout" "it"
[ 903.519] (WW) Option "xkb_variant" requires a string value
[ 903.519] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 903.548] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 903.548] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 903.548] (**) Video Bus: Applying InputClass "system-keyboard"
[ 903.548] (**) Video Bus: Applying InputClass "system-keyboard"
[ 903.548] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 903.548] (II) Using input driver 'evdev' for 'Video Bus'
[ 903.548] (**) Video Bus: always reports core events
[ 903.548] (**) evdev: Video Bus: Device: "/dev/input/event4"
[ 903.548] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 903.548] (--) evdev: Video Bus: Found keys
[ 903.548] (II) evdev: Video Bus: Configuring as keyboard
[ 903.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5/event4"
[ 903.548] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 903.548] (**) Option "xkb_rules" "evdev"
[ 903.548] (**) Option "xkb_model" "pc105"
[ 903.548] (**) Option "xkb_layout" "it"
[ 903.548] (WW) Option "xkb_variant" requires a string value
[ 903.548] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 903.548] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 903.548] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 903.548] (**) Power Button: Applying InputClass "system-keyboard"
[ 903.548] (**) Power Button: Applying InputClass "system-keyboard"
[ 903.548] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 903.548] (II) Using input driver 'evdev' for 'Power Button'
[ 903.548] (**) Power Button: always reports core events
[ 903.548] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 903.548] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 903.548] (--) evdev: Power Button: Found keys
[ 903.548] (II) evdev: Power Button: Configuring as keyboard
[ 903.548] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2/event1"
[ 903.548] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 903.548] (**) Option "xkb_rules" "evdev"
[ 903.548] (**) Option "xkb_model" "pc105"
[ 903.548] (**) Option "xkb_layout" "it"
[ 903.548] (WW) Option "xkb_variant" requires a string value
[ 903.548] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 903.549] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
[ 903.549] (II) No input driver specified, ignoring this device.
[ 903.549] (II) This device may have been added with another device file.
[ 903.549] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event7)
[ 903.550] (II) No input driver specified, ignoring this device.
[ 903.550] (II) This device may have been added with another device file.
[ 903.550] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event8)
[ 903.550] (II) No input driver specified, ignoring this device.
[ 903.550] (II) This device may have been added with another device file.
[ 903.551] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event9)
[ 903.551] (II) No input driver specified, ignoring this device.
[ 903.551] (II) This device may have been added with another device file.
[ 903.551] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event6)
[ 903.551] (II) No input driver specified, ignoring this device.
[ 903.551] (II) This device may have been added with another device file.
[ 903.552] (II) config/udev: Adding input device USB2.0 UVC WebCam (/dev/input/event15)
[ 903.552] (**) USB2.0 UVC WebCam: Applying InputClass "evdev keyboard catchall"
[ 903.552] (**) USB2.0 UVC WebCam: Applying InputClass "system-keyboard"
[ 903.552] (**) USB2.0 UVC WebCam: Applying InputClass "system-keyboard"
[ 903.552] (**) USB2.0 UVC WebCam: Applying InputClass "Keyboard Defaults"
[ 903.552] (II) Using input driver 'evdev' for 'USB2.0 UVC WebCam'
[ 903.552] (**) USB2.0 UVC WebCam: always reports core events
[ 903.552] (**) evdev: USB2.0 UVC WebCam: Device: "/dev/input/event15"
[ 903.552] (--) evdev: USB2.0 UVC WebCam: Vendor 0x4f2 Product 0xb130
[ 903.552] (--) evdev: USB2.0 UVC WebCam: Found keys
[ 903.552] (II) evdev: USB2.0 UVC WebCam: Configuring as keyboard
[ 903.552] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input16/event15"
[ 903.552] (II) XINPUT: Adding extended input device "USB2.0 UVC WebCam" (type: KEYBOARD, id 9)
[ 903.552] (**) Option "xkb_rules" "evdev"
[ 903.552] (**) Option "xkb_model" "pc105"
[ 903.552] (**) Option "xkb_layout" "it"
[ 903.552] (WW) Option "xkb_variant" requires a string value
[ 903.552] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 903.553] (II) config/udev: Adding input device HDA Intel MID Mic (/dev/input/event11)
[ 903.553] (II) No input driver specified, ignoring this device.
[ 903.553] (II) This device may have been added with another device file.
[ 903.553] (II) config/udev: Adding input device HDA Intel MID Headphone (/dev/input/event12)
[ 903.553] (II) No input driver specified, ignoring this device.
[ 903.553] (II) This device may have been added with another device file.
[ 903.553] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event10)
[ 903.553] (II) No input driver specified, ignoring this device.
[ 903.553] (II) This device may have been added with another device file.
[ 903.554] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 903.554] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 903.554] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 903.554] (**) AT Translated Set 2 keyboard: Applying InputClass "system-keyboard"
[ 903.554] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 903.554] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 903.554] (**) AT Translated Set 2 keyboard: always reports core events
[ 903.554] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 903.554] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 903.554] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 903.554] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 903.554] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 903.554] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 903.554] (**) Option "xkb_rules" "evdev"
[ 903.554] (**) Option "xkb_model" "pc105"
[ 903.554] (**) Option "xkb_layout" "it"
[ 903.554] (WW) Option "xkb_variant" requires a string value
[ 903.554] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 903.554] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/event13)
[ 903.554] (**) AlpsPS/2 ALPS DualPoint Stick: Applying InputClass "evdev pointer catchall"
[ 903.554] (II) Using input driver 'evdev' for 'AlpsPS/2 ALPS DualPoint Stick'
[ 903.554] (**) AlpsPS/2 ALPS DualPoint Stick: always reports core events
[ 903.554] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: Device: "/dev/input/event13"
[ 903.554] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Vendor 0x2 Product 0x8
[ 903.554] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found 3 mouse buttons
[ 903.554] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found relative axes
[ 903.554] (--) evdev: AlpsPS/2 ALPS DualPoint Stick: Found x and y relative axes
[ 903.554] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: Configuring as mouse
[ 903.555] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: YAxisMapping: buttons 4 and 5
[ 903.555] (**) evdev: AlpsPS/2 ALPS DualPoint Stick: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 903.555] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input15/event13"
[ 903.555] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint Stick" (type: MOUSE, id 11)
[ 903.555] (II) evdev: AlpsPS/2 ALPS DualPoint Stick: initialized for relative axes.
[ 903.555] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) keeping acceleration scheme 1
[ 903.555] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration profile 0
[ 903.555] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration factor: 2.000
[ 903.555] (**) AlpsPS/2 ALPS DualPoint Stick: (accel) acceleration threshold: 4
[ 903.555] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint Stick (/dev/input/mouse0)
[ 903.555] (II) No input driver specified, ignoring this device.
[ 903.555] (II) This device may have been added with another device file.
[ 903.555] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/event14)
[ 903.555] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "evdev touchpad catchall"
[ 903.555] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "touchpad catchall"
[ 903.555] (**) AlpsPS/2 ALPS DualPoint TouchPad: Applying InputClass "Default clickpad buttons"
[ 903.555] (II) LoadModule: "synaptics"
[ 903.555] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 903.555] (II) Module synaptics: vendor="X.Org Foundation"
[ 903.555] compiled for 1.17.1, module version = 1.8.2
[ 903.555] Module class: X.Org XInput Driver
[ 903.555] ABI class: X.Org XInput driver, version 21.0
[ 903.555] (II) Using input driver 'synaptics' for 'AlpsPS/2 ALPS DualPoint TouchPad'
[ 903.556] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 903.556] (**) Option "Device" "/dev/input/event14"
[ 903.670] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: x-axis range 0 - 1023 (res 0)
[ 903.670] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: y-axis range 0 - 767 (res 0)
[ 903.670] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: pressure range 0 - 127
[ 903.670] (II) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: device does not report finger width.
[ 903.670] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: buttons: left right middle
[ 903.670] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: Vendor 0x2 Product 0x8
[ 903.670] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: invalid finger width range. defaulting to 0 - 15
[ 903.670] (**) Option "TapButton1" "1"
[ 903.670] (**) Option "TapButton2" "2"
[ 903.670] (**) Option "TapButton3" "3"
[ 903.670] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 903.670] (**) AlpsPS/2 ALPS DualPoint TouchPad: always reports core events
[ 903.723] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event14"
[ 903.723] (II) XINPUT: Adding extended input device "AlpsPS/2 ALPS DualPoint TouchPad" (type: TOUCHPAD, id 12)
[ 903.723] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 903.723] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) MaxSpeed is now 1.75
[ 903.723] (**) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: (accel) AccelFactor is now 0.156
[ 903.723] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) keeping acceleration scheme 1
[ 903.723] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration profile 1
[ 903.723] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration factor: 2.000
[ 903.723] (**) AlpsPS/2 ALPS DualPoint TouchPad: (accel) acceleration threshold: 4
[ 903.723] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 903.724] (II) config/udev: Adding input device AlpsPS/2 ALPS DualPoint TouchPad (/dev/input/mouse1)
[ 903.724] (**) AlpsPS/2 ALPS DualPoint TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 903.725] (II) config/udev: Adding input device Toshiba input device (/dev/input/event5)
[ 903.725] (**) Toshiba input device: Applying InputClass "evdev keyboard catchall"
[ 903.725] (**) Toshiba input device: Applying InputClass "system-keyboard"
[ 903.725] (**) Toshiba input device: Applying InputClass "system-keyboard"
[ 903.725] (**) Toshiba input device: Applying InputClass "Keyboard Defaults"
[ 903.725] (II) Using input driver 'evdev' for 'Toshiba input device'
[ 903.725] (**) Toshiba input device: always reports core events
[ 903.725] (**) evdev: Toshiba input device: Device: "/dev/input/event5"
[ 903.725] (--) evdev: Toshiba input device: Vendor 0 Product 0
[ 903.725] (--) evdev: Toshiba input device: Found keys
[ 903.725] (II) evdev: Toshiba input device: Configuring as keyboard
[ 903.725] (**) Option "config_info" "udev:/sys/devices/virtual/input/input6/event5"
[ 903.725] (II) XINPUT: Adding extended input device "Toshiba input device" (type: KEYBOARD, id 13)
[ 903.725] (**) Option "xkb_rules" "evdev"
[ 903.725] (**) Option "xkb_model" "pc105"
[ 903.725] (**) Option "xkb_layout" "it"
[ 903.725] (WW) Option "xkb_variant" requires a string value
[ 903.725] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
[ 909.706] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 909.706] (II) NOUVEAU(0): NVLeaveVT is called.
[ 909.706] Error dropping master: -13(Permission denied)
[ 911.429] (II) Open ACPI successful (/var/run/acpid.socket)
[ 911.429] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 911.429] (II) NOUVEAU(0): NVEnterVT is called.
[ 911.429] Unable to get master: Permission denied
[ 911.516] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 912.490] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 912.490] (II) NOUVEAU(0): NVLeaveVT is called.
[ 912.490] Error dropping master: -13(Permission denied)
[ 1072.695] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1072.695] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1072.695] (II) NOUVEAU(0): NVEnterVT is called.
[ 1072.695] Unable to get master: Permission denied
[ 1072.793] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 1075.062] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1075.062] (II) NOUVEAU(0): NVLeaveVT is called.
[ 1075.062] Error dropping master: -13(Permission denied)
[ 1106.830] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1106.830] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1106.830] (II) NOUVEAU(0): NVEnterVT is called.
[ 1106.830] Unable to get master: Permission denied
[ 1106.923] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
[ 1112.623] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 1112.623] (II) NOUVEAU(0): NVLeaveVT is called.
[ 1112.623] Error dropping master: -13(Permission denied)
[ 1229.751] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1229.751] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 1229.751] (II) NOUVEAU(0): NVEnterVT is called.
[ 1229.751] Unable to get master: Permission denied
[ 1229.836] (--) synaptics: AlpsPS/2 ALPS DualPoint TouchPad: touchpad found
-------------- next part --------------
X.Org X Server 1.17.2
Release Date: 2015-06-16
X Protocol Version 11, Revision 0
Build Operating System: Linux 4.0.4-2-ARCH x86_64
Current Operating System: Linux fulvio 4.1.6-3-MANJARO #1 SMP PREEMPT Sat Sep 5 10:57:06 UTC 2015 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-4.1-x86_64 root=UUID=1057e760-4d08-43b7-a289-5cb3f89c7e10 rw resume=UUID=d22f7ccc-eefd-4711-b773-652c7f7f7175
Build Date: 17 July 2015 05:38:19PM
Current version of pixman: 0.32.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Fri Sep 11 17:09:17 2015
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(EE)
Fatal server error:
(EE) no screens found(EE)
(EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
(EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
(EE)
(EE) Server terminated with error (1). Closing log file.
More information about the manjaro-dev
mailing list